• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • Do not use PayPal Friend and Family, or any way that is not trackable (money orders, etc). Sellers, include the fee, and buyers don't do business with someone emails you off the site.
  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

For Sale K&P 32” 375 RUM barrel for TL3 SA w/ brass and dies

Chase723

Well-Known Member
Joined
Nov 22, 2009
Messages
888
Let's try this again. I let the listing expire this summer but it needs to go now. K&P 32" 1:8 twist 375 RUM barrel for TL3 short action. Muzzle threaded 3/4x20. 1.35" diameter shank for ~5.5" and then tapered to 1.1". Has flats machined into the barrel for easy changing with switch barrel setup. Chambered by Michael DeLoach of 9 Run Gun. Weighs 8lbs 7oz. When screwed onto a TL3 in a Manners T2A recoil is very manageable and you can watch impacts from 300 on out.

You read that right. This is a 375 RUM barrel that I had cut for my TL3 short action to shoot ELR. If you are looking for the most affordable way to get into ELR, no question this is it. This barrel shoots the 390gr A-tip at ~ 2820fps w/ N570 into -1/2 MOA. Before I did this I called Zermatt and Ray said go for it, the action can handle it…so I did. Supersonic to 2450 yards at a DA of 5000ft…I got greedy and wanted even more out of it, and had it throated a little longer but it didn't like it. SAMMI spec was fine, so I set the barrel back an inch (from 33" down to 32") and now it has a fresh chamber in it that I've never even shot. I suspect it will be just like it was before…which was awesome.

Hornady Dies with micrometer seater.

74 pieces of Norma Brass. Started life as 300 RUM and necked up for 375 RUM. (Just as an FYI if you're wondering, 375 RUM ADG brass pressured out early and gave me a weird bolt click and signs of incipient case head separations. Usually ADG brass is the opposite of that but this happened in 2 separate batches so I recommend using Norma brass. In this instance it's WAY better).

Want to sell as a package. $550/shipped. If someone wants to shoot the 390gr A tip, I have several hundred (not sure exactly how many) that I could work into the deal. Otherwise will sell separately after barrel etc sells.

Thanks,

Chase
IMG_1250.jpeg



IMG_1254.jpeg
 
Last edited:
Top