Joiled the 1 mile club today

Keystone7mm

Well-Known Member
Joined
May 1, 2023
Messages
80
Location
Nebraska
Today was definitely a bucket list day. I went out to a friend's house where they have steel set from 100 yards all the way to 1 mile. We shot several guns, but my focus was on my 7 Rem Mag. It is a custom job built by Accuracy Systems in Byers, CO on an old Remington 700 action. The barrel is a stainless 29" Criterion tube with a 1-7" twist. Today I was shooting my 190 grain A-tip plinking load over Retumbo going 2870 fps.

It was a beautiful day, and I started out at 600 yards and worked out to 1075 before setting the gun aside to rest and let others shoot. Later I shot at 1153 yards, and then jumped to 1650. I had to play with my dope a bit, but found both targets. I decided to try 1 mile. 1st shot elevation was great, but missed just right of the plate. Second shot I overcompensated for the wind and missed just left. Elevation was good. I settled in on 4 MOA of left windage and let her rip again and celebrated as the hit indicator lit up! One more shot and I was in the middle of the plate.

What a great afternoon, doing what I love to do with great friends. Thank you to everyone on this site for the knowledge I have gained over the years! It payed off today in a big way.
 
Today was definitely a bucket list day. I went out to a friend's house where they have steel set from 100 yards all the way to 1 mile. We shot several guns, but my focus was on my 7 Rem Mag. It is a custom job built by Accuracy Systems in Byers, CO on an old Remington 700 action. The barrel is a stainless 29" Criterion tube with a 1-7" twist. Today I was shooting my 190 grain A-tip plinking load over Retumbo going 2870 fps.

It was a beautiful day, and I started out at 600 yards and worked out to 1075 before setting the gun aside to rest and let others shoot. Later I shot at 1153 yards, and then jumped to 1650. I had to play with my dope a bit, but found both targets. I decided to try 1 mile. 1st shot elevation was great, but missed just right of the plate. Second shot I overcompensated for the wind and missed just left. Elevation was good. I settled in on 4 MOA of left windage and let her rip again and celebrated as the hit indicator lit up! One more shot and I was in the middle of the plate.

What a great afternoon, doing what I love to do with great friends. Thank you to everyone on this site for the knowledge I have gained over the years! It payed off today in a big way.
Thats some great shooting!!

Darrin
 
Congratulations Keystone 7mm,

I joined the 1 mile club on St. Patrick's day at the Clinton House Plantation
Used my 7mm PRC with factory Hornady 180 Eld-M ammo
180's moving 2875 fps out of my Shilen 26 inch barrel
Took me 8 shots to get on the 2'x4' plate and 6 shots to hit the 18 inch gong
It was great day shooting
The 7mm works really well in many configurations
 
Today was definitely a bucket list day. I went out to a friend's house where they have steel set from 100 yards all the way to 1 mile. We shot several guns, but my focus was on my 7 Rem Mag. It is a custom job built by Accuracy Systems in Byers, CO on an old Remington 700 action. The barrel is a stainless 29" Criterion tube with a 1-7" twist. Today I was shooting my 190 grain A-tip plinking load over Retumbo going 2870 fps.

It was a beautiful day, and I started out at 600 yards and worked out to 1075 before setting the gun aside to rest and let others shoot. Later I shot at 1153 yards, and then jumped to 1650. I had to play with my dope a bit, but found both targets. I decided to try 1 mile. 1st shot elevation was great, but missed just right of the plate. Second shot I overcompensated for the wind and missed just left. Elevation was good. I settled in on 4 MOA of left windage and let her rip again and celebrated as the hit indicator lit up! One more shot and I was in the middle of the plate.

What a great afternoon, doing what I love to do with great friends. Thank you to everyone on this site for the knowledge I have gained over the years! It payed off today in a big way.
Congrats man!đź‘ŤGreat account. It's like we were right there with you.
 
Congratulations Buddy!!!! Great Shooting!! That is something a hope to do as well. Id like to " TRY" my 270 Weatherby Mag at that range, but my plan is to put together a long-range rifle in 7 PRC, with the appropriate load , to hit steel at 1 mile. Tax Refund money!! BUCKET LIST!!!
 

Recent Posts

Top