Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
7mm STW
I built my first 7mmSTW
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Clark" data-source="post: 1468859" data-attributes="member: 6600"><p>I just got this running. It took a week. I will build another one for 2018 hunting.</p><p></p><p>1980 Rem 700 ADL 7mmRM</p><p>Bartlein #3 9" twist barrel</p><p>B&C stock with Aluminum bed</p><p>Wyatt magazine, follower, spring, and bottom metal</p><p>PTG bolt with AR15 extractor</p><p>PTG 0.187" recoil lug.</p><p>Piece of 3/32" oil hardening drill rod for the recoil pin</p><p>Timney 510 trigger</p><p>Aluma Hyde II paint Coyote color on the barrel</p><p>Action screws made from modified Unbrako cap screws.</p><p></p><p>Note to self: Remington may have a 0.704" diameter hole 0.155" deep in the breech of their barrel for their 0.694" bolt head, but for PTG bolt with an AR15 extractor to snap over the extractor rim of a chambered round, that hole will need to be 0.725".</p></blockquote><p></p>
[QUOTE="Clark, post: 1468859, member: 6600"] I just got this running. It took a week. I will build another one for 2018 hunting. 1980 Rem 700 ADL 7mmRM Bartlein #3 9" twist barrel B&C stock with Aluminum bed Wyatt magazine, follower, spring, and bottom metal PTG bolt with AR15 extractor PTG 0.187" recoil lug. Piece of 3/32" oil hardening drill rod for the recoil pin Timney 510 trigger Aluma Hyde II paint Coyote color on the barrel Action screws made from modified Unbrako cap screws. Note to self: Remington may have a 0.704" diameter hole 0.155" deep in the breech of their barrel for their 0.694" bolt head, but for PTG bolt with an AR15 extractor to snap over the extractor rim of a chambered round, that hole will need to be 0.725". [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
7mm STW
I built my first 7mmSTW
Top