Honing Redding dies

[trueblue]

I have a Redding die that I want to eliminate using the expander ball on it and have theinside neck diameter honed out to a certain diameter to control neck tension.
Redding used to do this, but not anymore.
Does anyone know of someone that does this ?

 

[rscott5028]

Or, sell yours and buy busing dies

 

[BountyHunter]

Go to 6mmbr.com
Look under tools for jlc precision

Jim Carstenson does that, also can convert the die to bushings or make a custom FL size bushing die using a redding body die

 

[trueblue]

Or, sell yours and buy busing dies

Redding does not sell a bushing die for the 6.5-06AI

 

[nheninge]

Forster will do this. Look at 6mmbr gear review for forster dies. Cheap and easy way to control neck tension, but bushing dies (by redding) are better IMHO. When your brass lot changes, change bushing if necessary. DONE

 

[trueblue]

Go to 6mmbr.com
Look under tools for jlc precision

Jim Carstenson does that, also can convert the die to bushings or make a custom FL size bushing die using a redding body die

Thanks for the heads up. I have had work done by JLC before.

 

[Kiwi Greg]

Redding does not sell a bushing die for the 6.5-06AI

Redding make a 280 Improved Type S bushing die use that with the appropriate bushing for the 6.5 & you should be GTG .