Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Hole filling opinions please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Coyote Shadow Tracker" data-source="post: 2794672" data-attributes="member: 116439"><p>Jon</p><p>Good evening and hope that you and your family are doing well. Also Happy Easter "Christ is Rissen".</p><p></p><p>If you have a good Tig machine and a good Tig welder go for that option. Watch what metal filler you use so you can Cold Blue.</p><p>Otherwise I would use option #1. Put some long set screws in and make sure that they don't go into the Bolt. Cut off the excess on the top of the Receiver and then carefully "Peen" and file down, the Emory fine cloth to finish and Cold Blue.</p><p></p><p>Option # 3</p><p>You can put a set screw into the holes, cut the slot off and then Peen and Tig over. No need for filler rod and hole already filled. You can PM me and then we can talk and can give you some ideas.</p><p></p><p>If you are going to Cerakote it you can make it look like "NEW" with any of the three processes. Just before Cerakote - Sand, Polish. Bead Blast.</p><p>You can make it look like NIB. Good luck and let us know when finished.</p><p>Len & Jill</p></blockquote><p></p>
[QUOTE="Coyote Shadow Tracker, post: 2794672, member: 116439"] Jon Good evening and hope that you and your family are doing well. Also Happy Easter "Christ is Rissen". If you have a good Tig machine and a good Tig welder go for that option. Watch what metal filler you use so you can Cold Blue. Otherwise I would use option #1. Put some long set screws in and make sure that they don't go into the Bolt. Cut off the excess on the top of the Receiver and then carefully "Peen" and file down, the Emory fine cloth to finish and Cold Blue. Option # 3 You can put a set screw into the holes, cut the slot off and then Peen and Tig over. No need for filler rod and hole already filled. You can PM me and then we can talk and can give you some ideas. If you are going to Cerakote it you can make it look like "NEW" with any of the three processes. Just before Cerakote - Sand, Polish. Bead Blast. You can make it look like NIB. Good luck and let us know when finished. Len & Jill [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Hole filling opinions please
Top