Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Hexagonal Boron Nitride
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Pdvdh" data-source="post: 1105823" data-attributes="member: 4191"><p>Here's my thoughts. With lightweight bullets, like my 60gr .223 bullets, I would add enough bullets to build up some mass in the tumbler to help ensure there's sufficient weight to increase the impacting force the bullets impose against one another. With the 300 grainers, that bullet weight itself will likely generate enough impact force to impact plate the HBN on the bullet surface without having to add a column/head of bullet mass. </p><p></p><p>I've never used a rotating drum tumbler Jeff - just to be clear on that. I've read they will do the job also, but I have only used a vibratory tumbler, following Mr. Tubbs' lead. I vibratory tumble my bullets for about 50 minutes. David Tubbs says 30 minutes in his video, with an indication that a heavier payload of bullets would require additional time. He stated he's learned that overloading a vibratory tumbler increased the tumbling time required to HBN coat the bullets. So he doesn't overload his vibratory tumbler, and then he states 30 minutes tumbling time is sufficient to coat the bullets.</p><p></p><p>That being said, there does have to be a minimum number of bullets placed in the tumbler when doing away with the stainless media. Because the bullets themselves must impact one another in order to plate themselves with the HBN. Taken to the extreme example - solely for purposes of illustrating my point - a single bullet could never be successfully coated in either a vibratory tumbler or rotary tumbler, in my opinion. There have to be multiple bullets, because the bullet on bullet impacts are what produces the impact plating force. I think 100 300gr bullets is sufficient. With the 60gr bullets, 250-300 bullets seemed about right.</p></blockquote><p></p>
[QUOTE="Pdvdh, post: 1105823, member: 4191"] Here's my thoughts. With lightweight bullets, like my 60gr .223 bullets, I would add enough bullets to build up some mass in the tumbler to help ensure there's sufficient weight to increase the impacting force the bullets impose against one another. With the 300 grainers, that bullet weight itself will likely generate enough impact force to impact plate the HBN on the bullet surface without having to add a column/head of bullet mass. I've never used a rotating drum tumbler Jeff - just to be clear on that. I've read they will do the job also, but I have only used a vibratory tumbler, following Mr. Tubbs' lead. I vibratory tumble my bullets for about 50 minutes. David Tubbs says 30 minutes in his video, with an indication that a heavier payload of bullets would require additional time. He stated he's learned that overloading a vibratory tumbler increased the tumbling time required to HBN coat the bullets. So he doesn't overload his vibratory tumbler, and then he states 30 minutes tumbling time is sufficient to coat the bullets. That being said, there does have to be a minimum number of bullets placed in the tumbler when doing away with the stainless media. Because the bullets themselves must impact one another in order to plate themselves with the HBN. Taken to the extreme example - solely for purposes of illustrating my point - a single bullet could never be successfully coated in either a vibratory tumbler or rotary tumbler, in my opinion. There have to be multiple bullets, because the bullet on bullet impacts are what produces the impact plating force. I think 100 300gr bullets is sufficient. With the 60gr bullets, 250-300 bullets seemed about right. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Hexagonal Boron Nitride
Top