Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
The Basics, Starting Out
Help with moa /scope on a build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="cross" data-source="post: 1478906" data-attributes="member: 8592"><p>So you have a 20 MOA rail correct?</p><p></p><p>I wouldn't even consider the amount of elevation built into the rail, as far as scope positioning goes, it's going to be in the same place as with a standard rail and you'll get another revolution out of your scope if you choose to shoot that far.</p><p></p><p>As far as keeping your scope down, you're going to probably be stuck with low or medium rings. That 56mm objective is going to stick up a ways and there's nothing you can do about it other than choose a scope with a smaller objective. My offhand guess would be that with that rail you could probably get Low (not extra low but Low) rings. It's going to be close and it may come down to having enough clearance to fit a scope cap on the front but I would try Low rings first and then move up to medium if necessary.</p><p></p><p>Good luck.</p><p></p><p>Cross</p></blockquote><p></p>
[QUOTE="cross, post: 1478906, member: 8592"] So you have a 20 MOA rail correct? I wouldn’t even consider the amount of elevation built into the rail, as far as scope positioning goes, it’s going to be in the same place as with a standard rail and you’ll get another revolution out of your scope if you choose to shoot that far. As far as keeping your scope down, you’re going to probably be stuck with low or medium rings. That 56mm objective is going to stick up a ways and there’s nothing you can do about it other than choose a scope with a smaller objective. My offhand guess would be that with that rail you could probably get Low (not extra low but Low) rings. It’s going to be close and it may come down to having enough clearance to fit a scope cap on the front but I would try Low rings first and then move up to medium if necessary. Good luck. Cross [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
The Basics, Starting Out
Help with moa /scope on a build
Top