H50BMG + BR2 primers

tbrice23

Well-Known Member
Joined
Dec 12, 2012
Messages
3,076
Location
Indiana
19°F to 27°F
26 Nosler, 140gr Hybrid Target, H50BMG, BR2.
Loaded from 82.0 gr to 89.0 gr in one grain increments. Approximately 80% to 98% load density .

No misfires not even a hint of delayed ignition. Never thought it would work if I hadn't tried it.

Not sure how cold it would have been to cause problems but at 19° it was good to go. Three shot groups of each charge the best being .550 moa at 193yds. The heavier the charge the lower the ES. At 87gr ES was 10 fps.

Next out I'm loading CCI 250s.
 
Warning! This thread is more than 7 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top