Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
got a new rifle, but i have an issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 1555873" data-attributes="member: 2736"><p>If a factory round chambers, And a go gauge chambers and a no go gauge doesn't. The problem may be in the die or the lube used to size the case.</p><p></p><p>Have him borrow or buy another die after he tries a different sizing lube. Even though the case may be larger after firing, It should size.</p><p>Be sure he lubes all of the outside of the case and the inside of the neck. Also make sure that the decaping pin is properly adjusted not to bottom out on the case web inside the case. In fact you can remove the decapper all together and just try to size the case body on one of the cases.</p><p></p><p>One other possibility is his load may be to hot so measure a fired case to compare against a loaded factory round.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 1555873, member: 2736"] If a factory round chambers, And a go gauge chambers and a no go gauge doesn't. The problem may be in the die or the lube used to size the case. Have him borrow or buy another die after he tries a different sizing lube. Even though the case may be larger after firing, It should size. Be sure he lubes all of the outside of the case and the inside of the neck. Also make sure that the decaping pin is properly adjusted not to bottom out on the case web inside the case. In fact you can remove the decapper all together and just try to size the case body on one of the cases. One other possibility is his load may be to hot so measure a fired case to compare against a loaded factory round. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
got a new rifle, but i have an issue
Top