I was saving these for a future 300wm build, but now I'm looking to have an ultralight weight 6.5 Creed hunting rifle built. So I need to move these to fund the stock, barrel, action, etc for that.
Here are the details.
Stock:
Manners T4A
Rem L/A inlet
Badger M5 DBM inlet
MTU barrel contour inlet (can be filled in by a good gunsmith to fit smaller barrels)
1" Pachmayer Decelerator Pad
Dead Flat Black factory color
5 flush cups (2 right side, 2 left side, 1 bottom rear).
Inlet for Badger EFR (can be filled in by a good gunsmith if not wanted).
$725 shipped (would be $750 + shipping + wait if you ordered). Paypal if you cover fees, otherwise USPS Money Order.
Barrel:
Bartlein MTU Contour Stainless Steel
5R
24" blank
30 cal
8 twist
$325 shipped. Paypal if you cover fees, otherwise USPS Money Order.
Would do the pair for $1025 shipped.
Trades (can go +/- cash):
- McMillan Hunters Edge stock with a Remington short action inlet
- Krieger, Bartlein, Brux 6.5 barrel, 5R, Krieger #1 or similar profile in a 23" blank
- Pierce titanium short action with titanium recoil lug, ultralight handle and bolt upgrade with a .473" bolt face.
Here are the details.
Stock:
Manners T4A
Rem L/A inlet
Badger M5 DBM inlet
MTU barrel contour inlet (can be filled in by a good gunsmith to fit smaller barrels)
1" Pachmayer Decelerator Pad
Dead Flat Black factory color
5 flush cups (2 right side, 2 left side, 1 bottom rear).
Inlet for Badger EFR (can be filled in by a good gunsmith if not wanted).
$725 shipped (would be $750 + shipping + wait if you ordered). Paypal if you cover fees, otherwise USPS Money Order.
Barrel:
Bartlein MTU Contour Stainless Steel
5R
24" blank
30 cal
8 twist
$325 shipped. Paypal if you cover fees, otherwise USPS Money Order.
Would do the pair for $1025 shipped.
Trades (can go +/- cash):
- McMillan Hunters Edge stock with a Remington short action inlet
- Krieger, Bartlein, Brux 6.5 barrel, 5R, Krieger #1 or similar profile in a 23" blank
- Pierce titanium short action with titanium recoil lug, ultralight handle and bolt upgrade with a .473" bolt face.