ELR Researcher
Well-Known Member
- Joined
- Aug 11, 2009
- Messages
- 1,536
Moor Accuracy shooting bench - Shooting Bench Please take the time to review the pics on their site and the full description. My pics below.
Upgraded at the factory to stainless steel hardware, 48" x 24" top, and longer seat arm (to allow the shooter to sit at the end of the bench).
Very good condition. Used twice. Some scratches on the top (transport damage - riding in the bed of my pick-up) - NO other damage. Extremely sturdy structure. Seat and top rotate, independently, 360 degrees. The top can be tilted up/down from the seated position with all your gear in place (obviously, hold onto the gear if the angle is significant). No dismount, just turn one knob. Notwithstanding what it may appear in the pics, the top does NOT cant to the sides. The top weighs approximately 35 #, the base approximately 50#, and the seat and seat arm approximately 8#. Seat can be left attached, if desired. Yellow strap shown in pics included - keeps everything tucked up nicely. Dropping a leg on your shin or foot is quite painful. Proceed with caution during setup and teardown. BTW, the pop pins work great!
$750, cash or check. Transfer once your check clears my bank. Now the only "difficult" part. This gear does not ship easily and crating it up would be expensive and very time consuming. So the sale needs to be within 100 miles of Redondo Beach, CA 90277. I will drive that far to get it to you. If you pick it up from my location ($15 discount - gas savings), payment can be made in full at that time. If I need to drive to you, $500 needs to be sent in advance with the balance paid at transfer.
Upgraded at the factory to stainless steel hardware, 48" x 24" top, and longer seat arm (to allow the shooter to sit at the end of the bench).
Very good condition. Used twice. Some scratches on the top (transport damage - riding in the bed of my pick-up) - NO other damage. Extremely sturdy structure. Seat and top rotate, independently, 360 degrees. The top can be tilted up/down from the seated position with all your gear in place (obviously, hold onto the gear if the angle is significant). No dismount, just turn one knob. Notwithstanding what it may appear in the pics, the top does NOT cant to the sides. The top weighs approximately 35 #, the base approximately 50#, and the seat and seat arm approximately 8#. Seat can be left attached, if desired. Yellow strap shown in pics included - keeps everything tucked up nicely. Dropping a leg on your shin or foot is quite painful. Proceed with caution during setup and teardown. BTW, the pop pins work great!
$750, cash or check. Transfer once your check clears my bank. Now the only "difficult" part. This gear does not ship easily and crating it up would be expensive and very time consuming. So the sale needs to be within 100 miles of Redondo Beach, CA 90277. I will drive that far to get it to you. If you pick it up from my location ($15 discount - gas savings), payment can be made in full at that time. If I need to drive to you, $500 needs to be sent in advance with the balance paid at transfer.
