TRG65
Well-Known Member
- Joined
- Dec 21, 2017
- Messages
- 452
For sale complete customized RPR 6.5x47 and 308 package as shown
I burned out the last 6.5x47 barrel and it has a brand new one installed. I went back to my TRG last year and this is now just taking up space. I'll be happy to provide the load I used in the last barrel to the buyer, it was a 147 ELDM at 2800 fps
1450 for everything shipped CONUS except the scope
1400 for everything shipped CONUS except the scope and bipod
Trades I'm interested in
Custom action with short bolt throw and matches a Rem 700 footprint (Curtis, Terminus, ARC, etc)
S&B PMII 5-25x56
High end 22, ie Vudoo
Proof carbon fiber .284 barrel 26" Sendero
Weight of the rifle as pictured 15.2# per bathroom scale
Gen 1 RPR
6.5x47 Lapua Hawk Hill standard profile barrel chambered by PVA- Unfired (0 rounds- I just swapped out the old barrel)
Timney RPR trigger
Seeking RPR handguard
RRS ACRA-swiss mounting plate
PVA barrel nut
Anarchy Outdoors Stainless FP and shroud
MPA vertical grip
Wiebad cheek pad
Ti bolt knob
Ti bolt shroud engraved with- It's not a Hobby, it's an obsession!
Extended mag release
PVA Mad Scientist .30 cal brake
Pic rail mounted bubble level
2 Magpul 10 round mags that came with the rifle-work great with the 6.5x47
1 Alpha 10 round no-spacer mag, the 308 barrel likes long loads and if using Bergers is well past what the Magpul can use, ELDs are right at the front of the Magpul
Magpul Gen 3 PRS stock. I shortened the one adapter, but the other is untouched. It was too long for my preference and went back to the OEM stock
Original parts are in the white box
Spare 6.5x47 barrel same as currently on the rifle-unfired
Original Ruger 20" 308 barrel about 400 rds fired
Go and no-go gauges for 6.5x47 Lapua and 308
Crows foot for PVA barrel nut
LRI wrench with gator grip to use as an action wrench with ½" torque wrench
Approximately 250-275 pieces of 6.5x47 brass, fired in the last barrel, but chambers easily in this barrel also-they do have about 10 reloads. I would still use them, but the chamber is enough different on my wife's rifle they don't work for hers.
Redding bushing 6.5x47 dies with bushings, 1FL, 1 nk, 1 body, and competition seater
Harris prone bi-pod with KMW tensioner
I burned out the last 6.5x47 barrel and it has a brand new one installed. I went back to my TRG last year and this is now just taking up space. I'll be happy to provide the load I used in the last barrel to the buyer, it was a 147 ELDM at 2800 fps
1450 for everything shipped CONUS except the scope
1400 for everything shipped CONUS except the scope and bipod
Trades I'm interested in
Custom action with short bolt throw and matches a Rem 700 footprint (Curtis, Terminus, ARC, etc)
S&B PMII 5-25x56
High end 22, ie Vudoo
Proof carbon fiber .284 barrel 26" Sendero
Weight of the rifle as pictured 15.2# per bathroom scale
Gen 1 RPR
6.5x47 Lapua Hawk Hill standard profile barrel chambered by PVA- Unfired (0 rounds- I just swapped out the old barrel)
Timney RPR trigger
Seeking RPR handguard
RRS ACRA-swiss mounting plate
PVA barrel nut
Anarchy Outdoors Stainless FP and shroud
MPA vertical grip
Wiebad cheek pad
Ti bolt knob
Ti bolt shroud engraved with- It's not a Hobby, it's an obsession!
Extended mag release
PVA Mad Scientist .30 cal brake
Pic rail mounted bubble level
2 Magpul 10 round mags that came with the rifle-work great with the 6.5x47
1 Alpha 10 round no-spacer mag, the 308 barrel likes long loads and if using Bergers is well past what the Magpul can use, ELDs are right at the front of the Magpul
Magpul Gen 3 PRS stock. I shortened the one adapter, but the other is untouched. It was too long for my preference and went back to the OEM stock
Original parts are in the white box
Spare 6.5x47 barrel same as currently on the rifle-unfired
Original Ruger 20" 308 barrel about 400 rds fired
Go and no-go gauges for 6.5x47 Lapua and 308
Crows foot for PVA barrel nut
LRI wrench with gator grip to use as an action wrench with ½" torque wrench
Approximately 250-275 pieces of 6.5x47 brass, fired in the last barrel, but chambers easily in this barrel also-they do have about 10 reloads. I would still use them, but the chamber is enough different on my wife's rifle they don't work for hers.
Redding bushing 6.5x47 dies with bushings, 1FL, 1 nk, 1 body, and competition seater
Harris prone bi-pod with KMW tensioner
Last edited:
