CZ 452-455 next step

LoneTraveler

Well-Known Member
Joined
Feb 7, 2014
Messages
937
Location
West Virginia
To get the CZ 452-455 to shoot accurately is glass bed the action. this rifle had a bump between the trigger inlet and the magazine inlet. masking tape, modeling clay and Acura Glass. I have glass bedded 4 452's DSC01693.JPG

DSC01696.JPG
 
It turned out great. It took some tinkering here and there to get it A-OK. It will shoot about 30-35 caliber size 10 shot groups with Eley Subsonic Hollow points at 50 yards. The friend I worked on it for gave up bow hunting this past fall and squirrel hunted every day he got a chance.
 
Pillars work wonders on the 455. I have installed a few sets and they always work.
I have shot well under 1/2" at 100 yards with the pillars installed, not before.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top