• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Custom 6mm Creed

mk443

Well-Known Member
Joined
Jan 7, 2011
Messages
373
Location
wyoming
I have a full custom 6mm creedmoor that I had built from all new parts at the beginning of this year. I built this for a Coyote/Prairie Dog/Antelope gun and it's a straight shooter. After talking to several Smith's I went with a 22 in barrel and it balances perfect and is a great pack weight but still has some meat on the barrel.

Specs:

-blueprinted Remington 700 short action w/ PT&G 1 piece spiral fluted bolt "elite kit from PT&G"
-Bartlien 3B 1-7.5 barrel finished @ 22 in
-LRI tactical recoil lug
-PT&G AI bottom metal w/ T Latch
-Bolt and barrel were sent to Kampfeld Customs and had a full M16 extractor installed, Kampfire knob installed, Barrel spiral TI fluted.

All parts were then sent to LRI (Long Rifles Inc) for build. After talking with Quinten at LRI, I paid the fee to have them re-blueprint the action when they barreled it as it was a minimal fee. LRI recommends the .104 freebore for shooting the 105 Hybrid and the 110 SMK's.

After getting it back from LRI and seeing it was a for sure shooter, I sent it to SAC (short action customs) to have them blast and Cerokote everything. They are hands down the best Cerokoters in my opinion and offer the slick Elite coating for the bolt. In hind sight I could of had SAC built the whole thing, but I know several close friends who have LRI 6 and 7's and they all rave about them. I ate it in the additional shipping but SAC adds just enough sheen that it just looks super clean and the bolt coating was a must so I held off to just let them do it all. The Barreled action, rings and bottom metal were are coated in SAC Green, and the bolt was coated in their Elite coating in Tac Grey. Action is as smooth as silk.

Barrel was broke in with the shoot/Clean/shoot method and then 4 loads were made with RL26 with the 105 Hybrids and 4 with the 110 SMK's. The gun LOVES the 105 Hybrids and is a 1/2 min shooter with RL26. Ran it up to 3130 FPS but the sweet spot was 3050 FPS. Easiest rifle I've ever worked with for load work. Based on primer count, I have right at 110 rounds through it. I had CTS make a turret for it and dialed it for 750 yards to verify and shot a 5 killer shot and my vertical dead on. Load data, drop charts and build paperwork will go to buyer.

It's currently sporting a NF NXS 5.5-22x50 MOAR HS/ZS in low Talley's which are coated to match the barreled action.

I'm offering this two ways, the barreled action w/bottom metal with 100 pieces of brass

Or

Barreled action w/bottom metal and mounted NF NXS (I have the box/paperwork for the scope) with 100 pieces of brass


Here is my cost breakdown:
Barrel: 350
Fluting: 135
M16: 130
Blueprint/chamber from LRI: 480
Bottom metal: 129
Matching Talley's: 30
Cerokote: 380
Campfire knob: 21
Action w/ PT&G Bolt: 600

My total cost was $2255 plus several hundred in shipping.


Ill sell the barreled action for $1750 shipped with roughly 100 pieces of Starline brass.
If you want the NF NXS with matching rings and turret for the load, add $1700


It's currently sitting in a bedded Manners EH5 with Atlas rail that I'm using for another build as it's my go to stock. If the stock is a must, we can talk.. Stocky's has their carbon stocks in stock now and it could be slapped on for a turn key set up. Will ship with factory trigger. Pics will be attached below.
 
FB8CA5D5-6A42-4B43-9326-DC2606CC4DE1.jpeg EDF76C5D-C444-4E20-8C48-3B014946EC1A.jpeg 370C0CBD-1956-4930-A586-EB0D6F2BDCFB.jpeg 2E59F218-4A5A-4E5A-A47E-502B8E6A64C3.jpeg 288EEBB0-A9DE-4FE5-A489-0E3D9F8FB5C0.jpeg 940AE0E5-D56B-4554-AAEA-87BD1E7BB42F.jpeg 89D71D20-6FE8-4286-BBA4-3C5BB677B911.jpeg 1D13D44A-9320-4AA3-BFE6-3D0FE6AA4540.jpeg 7C4E22A3-B84D-469B-82D6-868FA619B974.jpeg 07C76F00-07CE-497B-B549-ED87BA932FAC.jpeg Attached are groups shot at 100 and 200 and load Work up groups with charges listed.
 
Pm's Answered. Couple people asked, the stock is in Manners Elite Swamp camo. I did not shoot the 115's out of it. The 110's showed potential, think I needed to play with seating to bring them in more. The 105's were amazing so I just stopped working with anything else. The target pictures were shot off my bipod with a stack of kids gloves under the rear as I forgot my bag. In the load Work picture, you can see the 5 shot group in the upper right that was just stacking the bullets. That is the load I ran with.
 
If someone wants the stock, which is bedded to the rifle, I'll sell the rifle w/ matching Talley rings for $2350. If you want the NXS w/turret, add $1700
 
Top