archangel485
Well-Known Member
For sale is a 6.5 Creedmoor, scope and bipod not included, however the scope is something I would think about selling if you needed one for it. Rifle weighs 12 pounds with the scope which is a Sightron SIII for reference.
Action: R700 SA trued and customized by Twisted Barrel in Douglas, WY. Tactical bolt knob, customized bolt handle, customized action (flat spots milled in), and fluted bolt.
Scope rail: Seekins 30MOA bedded to action
Barrel: Bartlein 6 groove, less than 500 rounds, 26" stainless with very nice flutes, 1:8 twist, Sendero contour.
Stock: B&C R700 BDL SA Target/Competition w/ adjustable cheek piece, green with black web, BDL bottom metal with matte finish, hex head action screws, action bedded to stock.
Trigger: Geissele super 700 2 stage
About $1700 worth of parts and $800 worth of smith work in this rifle.
-B&C stock $435 http://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1118
-Geissele trigger $250 https://geissele.com/super-700-two-stage-trigger.html
-Seekins 30MOA scope rail $109 https://seekinsprecision.com/scope-rings-mounts/moa-scope-bases.html
-R700 action (no work done) $450
-BDL bottom metal $100 roughly
-Stainless barrel blank (no work done) $325
-Precision recoil lug $50
Total for parts $1719
Gunsmithing work done:
-Chamber, thread, crown $350
-Barrel fluting $110
-Bolt fluting $60
-Tactical bolt knob $60
-Action custom mill work not shown but $50+
-Refinish milled action $60
-Glass bed scope rail and action also not shown but $100
http://twistedbarrel.com/wp-content/uploads/2018/01/TwistedBarrelOrderForm.pdf
$2000 $1800 to your FFL
Action: R700 SA trued and customized by Twisted Barrel in Douglas, WY. Tactical bolt knob, customized bolt handle, customized action (flat spots milled in), and fluted bolt.
Scope rail: Seekins 30MOA bedded to action
Barrel: Bartlein 6 groove, less than 500 rounds, 26" stainless with very nice flutes, 1:8 twist, Sendero contour.
Stock: B&C R700 BDL SA Target/Competition w/ adjustable cheek piece, green with black web, BDL bottom metal with matte finish, hex head action screws, action bedded to stock.
Trigger: Geissele super 700 2 stage
About $1700 worth of parts and $800 worth of smith work in this rifle.
-B&C stock $435 http://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1118
-Geissele trigger $250 https://geissele.com/super-700-two-stage-trigger.html
-Seekins 30MOA scope rail $109 https://seekinsprecision.com/scope-rings-mounts/moa-scope-bases.html
-R700 action (no work done) $450
-BDL bottom metal $100 roughly
-Stainless barrel blank (no work done) $325
-Precision recoil lug $50
Total for parts $1719
Gunsmithing work done:
-Chamber, thread, crown $350
-Barrel fluting $110
-Bolt fluting $60
-Tactical bolt knob $60
-Action custom mill work not shown but $50+
-Refinish milled action $60
-Glass bed scope rail and action also not shown but $100
http://twistedbarrel.com/wp-content/uploads/2018/01/TwistedBarrelOrderForm.pdf
Last edited:
