Could someone run some ballistics for this load

Marine sniper

Well-Known Member
Joined
Sep 11, 2005
Messages
942
Location
Washington State.
I am still reasearching which ballistics program I am going to buy, looking at exbal, but need to call and ask a few questions.

I think I have a good load worked up in my .300 Weatherby, little more testing needed. I am shooting 210 Berger VLD's (.631 BC) at a litte over 3000 fps, averagaing 3029 fps over my Oehler 35 P, 15 fps ES. 80.0 grains of 7828, bullets approx .005 off.

I am going to do some shooting at steel plates on our range. I would like to have an idea where to start.

Could someone give me an idea where I will be in minutes (or inches). The rifle is sighted in at 100 yards, approx. 75* and 500 feet elavation. 100-1000 yards.

Thanks,

John
 
You can use this site for free

JBM - Calculations - Trajectory

Here's what it gave: ( I used 3000ft elevation and 59 degree's for the temp )
Calculated Table
Range Drop Drop Windage Windage Velocity Mach Energy Time Lead Lead
(yds) (in) (moa) (in) (moa) (ft/s) (none) (ft•lbs) (s) (in) (moa)
0 -1.5 *** 0.0 *** 3033.7 2.717 4290.8 0.000 0.0 ***
100 -0.0 -0.0 0.4 0.4 2894.4 2.592 3905.6 0.101 17.8 17.0
200 -2.7 -1.3 1.7 0.8 2759.4 2.472 3549.8 0.207 36.5 17.4
300 -9.9 -3.1 3.9 1.2 2628.5 2.354 3221.0 0.319 56.1 17.9
400 -22.1 -5.3 7.1 1.7 2501.3 2.240 2916.9 0.436 76.7 18.3
500 -39.9 -7.6 11.3 2.2 2377.7 2.130 2635.7 0.559 98.4 18.8
600 -63.9 -10.2 16.7 2.7 2257.6 2.022 2376.1 0.688 121.1 19.3
700 -94.7 -12.9 23.3 3.2 2140.9 1.918 2136.8 0.825 145.2 19.8
800 -133.1 -15.9 31.3 3.7 2027.6 1.816 1916.7 0.969 170.5 20.4
900 -179.9 -19.1 40.6 4.3 1918.0 1.718 1715.1 1.121 197.3 20.9
1000 -236.2 -22.6 51.6 4.9 1812.3 1.623 1531.2 1.282 225.6 21.5
 
Warning! This thread is more than 17 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top