Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Chambering a round
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hard rock" data-source="post: 2625797" data-attributes="member: 116620"><p>No that does not sound right , they case most likely doesn't rotate , if it does it would be minimal . Jam is jam , if the bullet gets stuck into the lands , it will be left into the lands as the case is extracted not because it rotated.The bolt actually will pull the bullet when jammed too much ,especially without a crimp or not enough neck tension. If you take a tight headspaced round and chamber it you can fill and see the copper on the face of the bolt as the bolt rotated on the case head.</p></blockquote><p></p>
[QUOTE="Hard rock, post: 2625797, member: 116620"] No that does not sound right , they case most likely doesn’t rotate , if it does it would be minimal . Jam is jam , if the bullet gets stuck into the lands , it will be left into the lands as the case is extracted not because it rotated.The bolt actually will pull the bullet when jammed too much ,especially without a crimp or not enough neck tension. If you take a tight headspaced round and chamber it you can fill and see the copper on the face of the bolt as the bolt rotated on the case head. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Chambering a round
Top