Camera Land's Deal of the Day - 11/22/2013 - Vortex

gr8fuldoug

Official LRH Sponsor
Joined
Dec 3, 2007
Messages
2,793
Location
Old Bethpage NY
clbanner120710.gif


As I am sure you are aware by now, a little while ago we started a "Deal of the Day" promo. This, "Deal of the Day" is posted everyday I am here at work, assuming I find the time each day to do this, lol.
We buy lots of demos, close-outs and assorted new product deals and sometimes we wind up with enough to offer crazy cheap deal on something awesome.

vortexlogo.gif


Todays deal is on a high end tactical riflescope.....

Vortex Razor HD 1-4x24 (EBR-556 MOA Reticle) (Part# RZR124-E) reduced to only $999.99 while supplies last

vortexrazorhd1-4x24.jpg

Vortex breaks new ground with the introduction of our Razor HD tactical riflescopes—built literally from the ground up to meet the demanding needs of military and law enforcement personnel. Expect fast handling and deadly accuracy when it gets up close and personal with the advanced Razor HD 1-4x24 riflescope.
Optical Features:
First Focal Plane - Subtensions remain consistent throughout magnification range.
APO Objective Lens System - Corrects color across the entire visual color spectrum—virtually eliminating chromatic aberration across the entire field of view.
Optically Indexed Lenses - Delivers optimum image sharpness and brightness with true reticle use for full ranging and holdover from edge to edge because of computer-controlled alignment during construction.
XD Lens Elements - Extra-low dispersion (XD) glass enhances resolution, color, and contrast.
XR Lens Coatings - Vortex XR proprietary anti-reflection lens coatings increase light transmission with multiple coatings on all air-to-glass surfaces.
Construction Features:
30 mm Tube - Provides greater strength and wider adjustment lattitude as compared to a 1-inch tube.
One-Piece Tube - Maximizes alignment for improved accuracy and optimum visual performance as well as strength and waterproofness.
Aircraft-Grade Aluminum - Construction from a solid block of 6061-T6 aircraft-grade aluminum delivers increased strength and rigidity.
Waterproof - O-ring seals prevent moisture, dust, and debris from getting inside the tube for reliable performance in all environments.
Fogproof - Filled with argon gas to inhibit internal fogging over a wide range of temperatures.
Shockproof - Lenses are locked in place, fore and aft, with machined locking rings to remain in perfect alignment and resist impact.
Hard Anodized Finish - Type-3 hard-coat anodization is durable; the low-glare matte surface of Stealth Shadow Black helps camouflage the shooter's position.
ArmorTek - Ultra-hard, scratch-resistant coating repels oils and corrosive salts on outer glass surfaces.
Internal Mechanism Design Features:
Tall Uncapped Turrets - Make range calculation and shooting adjustments fast and accurate with subtension marks that match the reticle .
BDC Elevation Turret - Allows very rapid elevation correction adjustments.
First Focal Plane Reticle - Scale of reticle remains in proportion to the zoomed image. Constant subtensions allow accurate holdover and ranging at all magnifications—no shift in point of impact during zoom.
Friction Reduction System - Provides superior durability, repeatability and accuracy for the life of the product. Prevents galling or deformation of the erector screw contact point because the heat-treated, hardened-steel pad floats on the end of the turret screw and interfaces with a hardened steel ring on the erector tube for steel-on-steel contact. Patent pending.
Turret Screws - Provides low-friction, wear-resistant performance: precision-machined from a silicon-brass alloy and treated with an advanced dry-film lubricant. Turret screw threads are ultra-precision machined to sub-2 micron tolerances (less than 78-millionths of an inch). Ultra-smooth operation and adjustments.
Erector Tube System - Precision-machined from premium brass alloy with anti-galling properties for great strength and durability. The erector spring of chromium vanadium withstands compression, has high fatigue resistance, and is tumble-polished to a mirror finish for micro-precise elevation and windage adjustments.
Single Spring Construction - Fully constrains (without over-constraining) the optical system for predictable, improved accuracy throughout the range of elevation adjustment.
Glass-etched Reticle - Protected between two layers of glass (not made from wire) for optimum durability and reliability.
Illuminated Reticle - Electronic illumination aids in low light visibility of reticle. Battery included.
Illumination Control - Can be turned on or off with a single click between each intensity level—allowing access to a preferred illumination setting without having to progress through each intensity level.
Convenience Features:
MagView Bar - Combines a fiber optics magnification indicator with raised rear-facing magnification references for clear viewing in low light conditions. Patent pending.
Radius Bar - Fiber optic turret rotation indicator provides illuminated and tactile point of reference for turret rotations. Patent pending.
Fast Focus Eyepiece - Allows quick and easy reticle focusing.
Flip Cap Covers - Protect ocular and objective lenses.
Specifications
Magnification: 1-4 x
Objective Lens Diameter: 24 mm
Eye Relief: 3.9 inches
Field of View: 94.5-24.2 feet/100 yards
Tube Size: 30 mm
Turret Style: Tall Uncapped
Adjustment Graduation: 1/4 MOA
Max Elevation Adjustment: 200 MOA
Max Windage Adjustment: 200 MOA
Parallax Setting: 100 yards
Length: 10.3 inches
Weight: 20.2 ounces

NOTE: We're sorry, but these optics CANNOT be shipped outside the USA

Please feel free to call Doug or Neil @ 212-753-5128 with any questions or to place an order.

BTW, a portion of every Vortex sale is donated to United Cerebral Palsy.


* These "Deal of the Day" opportunities last as long as we have inventory so if you see this and want this please give a call or check our site.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top