Bottom metal for SA Mod 70

[Randy Tidwell]

Posted earlier about my currant project, SA Mod 70 chambered in 6.5x47 Lapua.

Installed the barrel couple days ago, waiting for the HS stock to come in.

Been searching for bottom metal, i.e. guard, floor plate and mag box.
not having much luck finding them.

Not a big fan of detachable mags, but will take one if I can find it.

Does anyone make a one piece set up?

Thx, Randy

 

[26Reload]

Does the model 70 bottom metal have the 'pin to push for releasing plate?...like this? And hidden front screw...longer front portion of the btm metal?

 

[Randy Tidwell]

The action came from a youth model that had a blind mag.

I found that Williams Firearms makes a one piece for the SA, but I have not been able to get an answer about availablity.

I would love to find a two piece take off.

 

[Randy Tidwell]

Does the model 70 bottom metal have the 'pin to push for releasing plate?...like this? And hidden front screw...longer front portion of the btm metal?

Very close. That one looks like a Rem Mod 700?

 

[26Reload]

Holes are definitely different from the sa700 rem on left...hole behind trigger guard is very small...

 

[Randy Tidwell]

Holes are definitely different from the sa700 rem on left...hole behind trigger guard is very small...
View attachment 344182

Yup, that's what I'm looking for.

Who makes that? Do you want to sell it?

 

[Rhett Crider]

Posted earlier about my currant project, SA Mod 70 chambered in 6.5x47 Lapua.

Installed the barrel couple days ago, waiting for the HS stock to come in.

Been searching for bottom metal, i.e. guard, floor plate and mag box.
not having much luck finding them.

Not a big fan of detachable mags, but will take one if I can find it.

Does anyone make a one piece set up?

Thx, Randy

You are referring to Winchester, correct?

 

[Randy Tidwell]

Yes, looking for bottom metal for SA Mod 70 for a mid 80's era action.

 

[Rhett Crider]

Did you check Midwest Gun Works or Numrich? New Haven build, CRF?

 

[26Reload]

Yea....just picked it up on a work trade...
Pm me what you're thinking...think there is a sa tall box and short box...and one the feed lips have not been pressed in...same cuts as others..just straight wall box...
No spring or follower....
Several la boxes..short and tall...

 

[KS2506]

Contact Midwest Gun Works, they have a large assortment of M70 parts. If they do not have it, email me at [email protected] I have a bunch of M70 mag boxes, followers, etc. Going to set up for a gun show this afternoon. Will look when I get home. What case is the 6.5x47 Lapua based on?

 

[Chamberman]

Contact Sunny Hill: http://sunnyhillgunparts.com/

Kind of expensive- but they are the best for Win 70's

 

[Greenvette01]

PTG had trigger guard assemblies for Rem 700 they might have M70's

 

[cornshank]

I may as well throw the name of the company I use in here also , never know , someone else might need a part .

Weisner's inc