• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Bighorn TL3 6.5 CM huntig rig...

joshf303

Well-Known Member
Joined
Dec 22, 2008
Messages
948
Recently put this together, but have my eyes on something else....

Bighorn TL3 (Action does have some typical brass marks at the rear of the port)
Med tang, 20 MOA
Bartlien 2B 8 twist cut, threaded, and finished at 18". SAAMI freebore etc for box ammo
Manners Superlite
MPA DBM (Accurate Mag not incuded)
Timney trigger (This was an old trigger I had lying around. It's a little rough looking, does not have the bolt release, but works and is functional)
Barrel work done by Shaen Magan

Barrel has a total of 27 rounds through it. Running 140 AMaxes at 2710 with 4350. Rifle is 9lbs on the nose with the suppressor attached, 8lbs naked. SCOPE/RINGS/SUPPRESSOR/MAG/ OLD FENCING or PECAN STUMP not included. Payment by cashiers check, PayPal, or USPS MO...ONLY trade would be a Barrett FC 7/08 with 21" barrel. $2475 shipped.....

8AzBFgeh.jpg

FKYhzDMh.jpg

3veVhafh.jpg

Vkffw9Sh.jpg

kGSgMp4h.jpg
 
Up...
Willing to split barreled action, stock and DBM but barreled action must sell first.
 
PMs returned....
$1525 TYD on barreled action.
$650 shipped for the Manners. (TL3 is a 700 footprint. Any Rem 700 SA or clone will fit.)
$125 MPA DBM
 
This action has the Savage barrel threading? I was told some of the Big Horns have Remington threading.
 
Yes, this is a 20TPI. Some of the TL2s came in either 16 or 20 TPI, but all the TL3s are 20s.
 
Top