BEGER 190 VLD load data 300WM

NYLES

Well-Known Member
Joined
Dec 18, 2006
Messages
773
Location
FREE RUN, MS
Rifle Stock Sendero 26", Jewel trigger, NF NXS R2 shoots great
New Norma brass
powders on hand RL25, RL22, H4831SC, Retumbo, 8700, HUS869

Going to give the 190 VLD a try but need some where to start and what powder info. Will be loading them long single shot length.
 
Cant help with the 190's, but I load for a few 300 win senderos with 210 Bergers. They will fit in the factory mag box and I get great accuracy with H-1000.

Jeff
 
I shoot the 190's for my main hunting load from 300wm....but I'm away from home and don't have my exact load info with me. I'll give you what I can pull from memory.

I'm shooting a Remington SPS and it would not shoot as well at max loads, so I had to back it off a bit. I'm shooting over 77-78gr of H4831 and getting 2820fps. Max load was closer to 3000 but groups opened up.

I also tried H1000....better velocities in general but again groups were not quite as good as with H4831.

If you haven't done so already you can send an email to Berger and they will email you a variety of load options for the 190gr.

If you want my exact load recipe send me a PM and I'll reply when I return home after the holiday.
 
2.868" to the O-give 3.552" Over all length. This is .005" off the lands in an early Sendero with the black non-fluted barrel

Jeff

bout where I was going to start didnt realize they could get that close to the lands and still fit in the mag box
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top