Bartlein 3B Threaded 5/8-24?

[jlarose85]

Guys,

I'm having a hard time getting a clear answer on this. I'm working on components for a new build and need to know if a Bartlein 3B contour is heavy enough to thread 5/8-24. Their website shows .700" at 26" but my finished length on this build is going to be either 20" or 22". Do you guys know if I'll run into any issues threading with this configuration?

Appreciate the help!

 

[Roughrice]

Should be no problem at all.
The Bart 3b is similar to most #4's.
It should be getting close to .720 at least by 20"-22"
I had a couple Wilson #4's threaded 5/8x24 and was like .712 @ 24" and never had an issue.
The 3b has plenty meat to handle a suppressor on the end.

 

[lancetkenyon]

Bartlein 3B fluted 26" threaded 5/8x24 w. APA Micro Bastard brake.

Bartlein #3B spiral fluted 26" threaded 5/8"x24 w. APA Micro Bastard brake

 

[SKanez]

Guys,

I'm having a hard time getting a clear answer on this. I'm working on components for a new build and need to know if a Bartlein 3B contour is heavy enough to thread 5/8-24. Their website shows .700" at 26" but my finished length on this build is going to be either 20" or 22". Do you guys know if I'll run into any issues threading with this configuration?

Appreciate the help!

I have a couple of Bart #3's (both 18") that are 5/8-24 - you should be fine with the 3B.

 

[jlarose85]

Appreciate the help fellas! Found one that someone actually has in stock so I wanted to scoop it up.

 

[ADLEE2]

I have a 24"3b, in 280ai that is threaded 5/8-24.