Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Badlands BD-2 load data
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="codyadams" data-source="post: 2520504" data-attributes="member: 87243"><p>Ok, I'll see if I can get my info here. I'll start with the smallest and work my way up......</p><p></p><p>19" suppressed .270 Sherman, 1-8 twist</p><p>140 SBD II</p><p>CCI 200</p><p>Norma brass</p><p>3.500" OAL (.075" jump)</p><p>62.0 grain RL-26</p><p>3030 fps.</p><p>Max pressure was around 3160 fps with 64.5 grains, but this node was very accurate and forgiving. Will soon be loading the same bullet in another 25" barreled .270 Sherman and Peterson brass, interested to see what I end up getting for velocity. Below is what it looks like seated to touch the lands. The marker on the right bullet shows where the boat tail bearing surface starts.</p><p></p><p>[ATTACH=full]362675[/ATTACH]</p><p></p><p>Next,</p><p>24" Suppressed 300 WSM, SAAMI spec 1-10</p><p>175 BDII</p><p>CCI 250</p><p>Norma brass</p><p>2.930" OAL (.055" jump)</p><p>66.5 grain H4831sc</p><p>2875 fps</p><p>Max was 2920 fps @ 67.4 grains. This is out of a factory Savage ultralight with a proof Carbon barrel, loosing a ton of capacity due to the short throat. Below, 2.930" - </p><p></p><p>[ATTACH=full]362676[/ATTACH]</p><p></p><p>Next,</p><p>24" .338 Norma mag, CIP chamber, 1-9 twist</p><p>250 SBD II</p><p>GM215M</p><p>Peterson brass</p><p>3.656" OAL (.050" jump)</p><p>92.4 grain Retumbo</p><p>2900 fps</p><p>never found pressure signs, and I worked up to 93.5 grains @ ~2940ish. Below is seated @ .050" off I believe.</p><p></p><p>[ATTACH=full]362677[/ATTACH]</p><p></p><p>This is what I got on the BDII's, soon as I get my barrel (8 twist Bartlien) I will start working on the 205's in a custom throated 20" 30 Nosler. I have VV-N565, IMR7828ssc, H1000, RS Magnum, Retumbo, RS-LRT, and some RL-33. Any suggestions on what I should start with? I was planning on trying H1000 and N565 first. Also, do these 205's seem to like to jump, or has anyone had them shoot well close to the lands? Below is a machinist up of the 205 SBDII, 215 Berger, and 212 eld-x. </p><p></p><p>[ATTACH=full]362678[/ATTACH]</p></blockquote><p></p>
[QUOTE="codyadams, post: 2520504, member: 87243"] Ok, I'll see if I can get my info here. I'll start with the smallest and work my way up...... 19" suppressed .270 Sherman, 1-8 twist 140 SBD II CCI 200 Norma brass 3.500" OAL (.075" jump) 62.0 grain RL-26 3030 fps. Max pressure was around 3160 fps with 64.5 grains, but this node was very accurate and forgiving. Will soon be loading the same bullet in another 25" barreled .270 Sherman and Peterson brass, interested to see what I end up getting for velocity. Below is what it looks like seated to touch the lands. The marker on the right bullet shows where the boat tail bearing surface starts. [ATTACH type="full"]362675[/ATTACH] Next, 24" Suppressed 300 WSM, SAAMI spec 1-10 175 BDII CCI 250 Norma brass 2.930" OAL (.055" jump) 66.5 grain H4831sc 2875 fps Max was 2920 fps @ 67.4 grains. This is out of a factory Savage ultralight with a proof Carbon barrel, loosing a ton of capacity due to the short throat. Below, 2.930" - [ATTACH type="full"]362676[/ATTACH] Next, 24" .338 Norma mag, CIP chamber, 1-9 twist 250 SBD II GM215M Peterson brass 3.656" OAL (.050" jump) 92.4 grain Retumbo 2900 fps never found pressure signs, and I worked up to 93.5 grains @ ~2940ish. Below is seated @ .050" off I believe. [ATTACH type="full"]362677[/ATTACH] This is what I got on the BDII's, soon as I get my barrel (8 twist Bartlien) I will start working on the 205's in a custom throated 20" 30 Nosler. I have VV-N565, IMR7828ssc, H1000, RS Magnum, Retumbo, RS-LRT, and some RL-33. Any suggestions on what I should start with? I was planning on trying H1000 and N565 first. Also, do these 205's seem to like to jump, or has anyone had them shoot well close to the lands? Below is a machinist up of the 205 SBDII, 215 Berger, and 212 eld-x. [ATTACH type="full"]362678[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Badlands BD-2 load data
Top