Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Any help with charge handle issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Darryle" data-source="post: 3018609" data-attributes="member: 109917"><p>If you are having to mortar the round out of battery, there is a bigger issue than charging handle.</p><p></p><p>Look at the locking lugs paying attention to the backside of the lugs, look for unusual wear or burrs.</p><p></p><p>Look closely at the bolt carrier, verify there are no unusual wear patterns, look at the key raceway for signs of binding.</p><p></p><p>Check gas block alignment, verify that the adjustment screw is backed all the way out. Only adjust it after it begins to run, then in until it stops cycling and back out a 1/4 turn.</p><p></p><p>Verify gas tube to BCG gas key alignment.</p><p></p><p>Check the chamber and see how well it is finished out.</p><p></p><p>Both [USER=69506]@Bucklowery[/USER] and [USER=109716]@SPitty[/USER] have given you sound advice. We need more though.</p><p></p><p>Report back with your findings and we'll go from there.</p></blockquote><p></p>
[QUOTE="Darryle, post: 3018609, member: 109917"] If you are having to mortar the round out of battery, there is a bigger issue than charging handle. Look at the locking lugs paying attention to the backside of the lugs, look for unusual wear or burrs. Look closely at the bolt carrier, verify there are no unusual wear patterns, look at the key raceway for signs of binding. Check gas block alignment, verify that the adjustment screw is backed all the way out. Only adjust it after it begins to run, then in until it stops cycling and back out a 1/4 turn. Verify gas tube to BCG gas key alignment. Check the chamber and see how well it is finished out. Both [USER=69506]@Bucklowery[/USER] and [USER=109716]@SPitty[/USER] have given you sound advice. We need more though. Report back with your findings and we'll go from there. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Any help with charge handle issues
Top