Any advice for a Remington 700 magnum extractor

[Jpron]

I need to replace one. Can't find one anywhere. Does any know of anywhere to find one? Thanks

 

[shortgrass]

None to be found, except maybe at a gunsmiths shop. Then, expect to pay a premium as there are no more at this time. Also, many won't sell without installing . I can not hardly blame 'um. Other option, have a M16 style machined and installed.

 

[MagnumManiac]

I am currently out of 'em too.
Just fitted 2 Sako style extractors, just finishing up the sleeved inner ring, then fitting it tomorrow. Will do the other down the track.
I will be buying PT&G single piece bolts from now on with Sako style, as the M16 parts are restricted here…stupid.

Cheers.

 

[shortgrass]

I am currently out of 'em too.
Just fitted 2 Sako style extractors, just finishing up the sleeved inner ring, then fitting it tomorrow. Will do the other down the track.
I will be buying PT&G single piece bolts from now on with Sako style, as the M16 parts are restricted here…stupid.

Cheers.

Sound like they need to re-name M16 extractors to "Custom Claw Extractor Conversion Kit", or something to that effect. Here, in the States, we don't actually use extractors made for the M16 or AR15 for the conversion. I would have to check, but I highly doubt that the extractor made by Badger Ord would actually fit into an AR15 bolt, and I know the Mini16 made by PT&G won't fit (a M16 or AR15 bolt).

 

[Doom2]

Unfortunately RemArms is going to be only source, if and when they get up and running, assuming they actually do. I actually suspect that Remington outsourced that component.

 

[MagnumManiac]

Sound like they need to re-name M16 extractors to "Custom Claw Extractor Conversion Kit", or something to that effect. Here, in the States, we don't actually use extractors made for the M16 or AR15 for the conversion. I would have to check, but I highly doubt that the extractor made by Badger Ord would actually fit into an AR15 bolt, and I know the Mini16 made by PT&G won't fit (a M16 or AR15 bolt).

Whether it actually fits an AR15/M16 doesn't matter here, if it's in the name, they are banned.
I just call everything 'tool steel' to get around most BS laws here. 'Measuring tools' also works well here.
Just don't need the hassle when bringing stuff like bolts through customs…too many stupid question time, if you get my drift.

Cheers.

 

[436]

I need to replace one. Can't find one anywhere. Does any know of anywhere to find one? Thanks

Send the bolt out have a Sako extractor put in that pretty much ends the problem now and down the road as well. Good luck.

 

[Big Trouble]

This is what I ended up doing for a Rem 700 300RUM...https://youtu.be/B5jX05Asg9E. They are a great local shop for me. I will end up getting a custom when finances allow.

 

[Triple BB]

I just had an M16 style extractor installed last week at my local Smith. He cut the crown, installed a brake, and bead blasted the finish all for $125. I thought that was more than fair...

 

[Big Trouble]

Most certainly fair! I am spending a little more than that just for the extractor upgrade.

 

[jaclthr]

Hello Sir,

Are you looking for the "Rivet" type extractor or the "Rivetless" ?

jaclthr

 

[shortgrass]

Mag

Hello Sir,

Are you looking for the "Rivet" type extractor or the "Rivetless" ?

jaclthr

Magnum are riveted

 

[jaclthr]

Hey Sir,

I have "Rivet" type extractor for Rem.700 mag. and rivets if you still have need.

jaclthr

 

[RAGGED EDGE]

Doesn't the installation of a Sako or M-16 type extractor compromise the vaunted "Three Rings of Steel"?