Annealer for short cases

[Varmiter71]

I was wondering what are my options for annealing short cases.
I am wanting to anneal 30 carbine cases to make 22 spitfire / 5.7 Johnson. I would do other cases as well.

 

[338 dude]

I was wondering what are my options for annealing short cases.
I am wanting to anneal 30 carbine cases to make 22 spitfire / 5.7 Johnson. I would do other cases as well.

An amp annealer would be your top choice

 

[Varmiter71]

Those are pricey. I can buy a lot of brass for that.
I am probably going to have to save my pennies for a long time

 

[Rick Richard]

EP Integration annealer. Love mine.

No special or different size wheels or anything to load from the smallest to the largest cartridge.

 

[Pdyson]

The ugly annealer has aluminum wheels and can take the heat from large batches of short cases.

 

[Bob Wright]

Torch and socket is the least costly.

 

[X'n Tex'n]

I was wondering what are my options for annealing short cases.
I am wanting to anneal 30 carbine cases to make 22 spitfire / 5.7 Johnson. I would do other cases as well.

Bench Source

 

[CoyoteConquest]

I like my ugly annealer. I've had it for a few years. It has short aluminum wheels for short cases. Works great for everything I've used it for

 

[QuietTexan]

Annealeez – For a Hot Piece of Brass!

annealeez.com

Has a wheel set for cases 1.25-2" long, but also specifically says it can do 17 Hornet which is 1.35". Might be easier to call them and ask which wheels to be sure, but if it can do 17 Hornet is should be able to handle the longer 5.7 Johnson/30 Carbine fine.

 

[Varmiter71]

Thanks for all the advice

 

[can1010]

AGS annealer. available at Blue Coller Reloading.

 

[Stadoc]

AGS annealer. available at Blue Coller Reloading.

I have an AGS and I've had good results