Ammo storage for 4.25”+ cartridge?

[MagnumManiac]

G'day all,
Looking for an answer for 2 rounds now that are getting beyond a joke for ammo transportation.
Normally, I hunt with a MTM 20 round flip top belt carrier ammo box in my pack. Have done so for years with 270Bee, 300WM, 338WM & 264WM.
Now my dilemma has reached into 300/340/375Bee and 7STW. None of these fit the 20 round MTM boxes and I have searched to no end fixing a suitable 20 round box with a snap on close function.
I have always had to use rifle butt sleeve ammo carriers for my 338-416 Rigby Improved 45° due to it's stupid long length of 4.25". My 338 Edge rounds got damaged tips on quite a few trips due to their length, trying to avoid this if I can.
Running ABLR bullets and the tips seem fragile in comparison to regular Accubonds.

I would prefer something different as the tips on these other rounds are not solid brass and may get damaged in my pack.

Does anyone have a good solution for this dilemma?

Cheers.

 

[orkan]

Bullet Box Complete System 100 Round (4.5" Max OAL) - Standard Cartridge | Inflection D&E

Foam.The foam is made of a closed cell polyethylene foam similar to a “Pick N Pluck” style of foam. It has 100 holes to accommodate up to 100 rounds. This case is designed to house cartridges as small as a standard round such as a 6.5 Creedmoor and as large as a magnum cartridges such as a 300...

www.inflectionde.com

 

[GrayCreed]

What about some of these companies that make custom foam inserts for ammo cans? Make a 420rnd 556 ammo can into a 50 round box!

 

[FEENIX]

G'day all,
Looking for an answer for 2 rounds now that are getting beyond a joke for ammo transportation.
Normally, I hunt with a MTM 20 round flip top belt carrier ammo box in my pack. Have done so for years with 270Bee, 300WM, 338WM & 264WM.
Now my dilemma has reached into 300/340/375Bee and 7STW. None of these fit the 20 round MTM boxes and I have searched to no end fixing a suitable 20 round box with a snap on close function.
I have always had to use rifle butt sleeve ammo carriers for my 338-416 Rigby Improved 45° due to it's stupid long length of 4.25". My 338 Edge rounds got damaged tips on quite a few trips due to their length, trying to avoid this if I can.
Running ABLR bullets and the tips seem fragile in comparison to regular Accubonds.

I would prefer something different as the tips on these other rounds are not solid brass and may get damaged in my pack.

Does anyone have a good solution for this dilemma?

Cheers.

For your consideration >>> https://www.unknownmunitions.com/product/ammo-case/

 

[MagnumManiac]

Thanks Feenix, that's what I've been looking for but never found.
Will even fit 33XC/37XC and Cheytac....good to know.

Cheers.

 

[MagnumManiac]

I made a 50 round count and 100 round count for my 338-416 Rigby Improved, but they don't have a lid and rattle around something shocking on the way to a hunt or match.

Cheers.

 

[seagate slim]

Since its going in your pack, you could look at fishing tackle boxes. They come in all shapes and sizes and you can cut some foam inserts to fit your rounds.

https://www.cabelas.com/shop/en/tackle-boxes-bags?searchTerm=tackle+boxes&krypto=KF6NvOItXuN84dBEQO1X1QfPCj7DKIbYNsWF4fQsvBVvyFKLOHJlOQBbugBVJvcvvf7dh6adOf4E4poJAY2L9%2FJ3wWjssgfBs6zLVC1mqWw%3D#facet:3074457345616968515&productBeginIndex:0&facetLimit:&orderBy:&pageView:grid&minPrice:&maxPrice:&pageSize:&

 

[Charles Keethler]

Look at MTM RF22-LM,BUF-10-70, or BMG-10 slip-top. Also look at MTM H50-XL Deluxe comes with bullet protector 50 rd. box with lid. MTMCASE-GARD.com , hope something will fit.

 

[skipglo]

For your consideration >>> https://www.unknownmunitions.com/product/ammo-case/

Very nice lead! ( Especially for the Rich and Famous) but darn nice! You da man Feenix!

 

[MagnumManiac]

Look at MTM RF22-LM,BUF-10-70, or BMG-10 slip-top. Also look at MTM H50-XL Deluxe comes with bullet protector 50 rd. box with lid. MTMCASE-GARD.com , hope something will fit.

I have the BUFF-10 for my 416 Rigby, my 338-416 Rigby Improved doesn't fit.
I have the H-50 XL and they do not fit.

Feenix has put me into the Unknown Munitiins boxes. When I have the funds, as we are again in LOCKDOWN here. I will order a few of these.
Need to fit a few cases now, 300RUM, 7STW & 338-416/33XC. My 300/340/375 Bee will probably need a new home too.

Cheers.

 

[Jeremy Henderson]

These may help

(SAC) Silent Ammo Carrier

Reduce the Rattle! The SAC addresses the issues that you have to deal with when carrying a lot of ammo. Noisy, bulky boxes and trouble policing and segregating brass. 100 rounds of .308 ammo can be stored internally while 10 external ammo loops provide for quick access. An internal divider lays...

www.tabgear.com

Bullet Binder

Have you been looking for a way to carry your rounds so the bullets do not touch each other? If you go to the trouble of using a bullet pointing die to uniform each bullet tip you don’t want them banging against each other after going to that much trouble. The TAB GEAR Long Action Bullet Binder...

www.tabgear.com