Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
A moron and his uni-throater...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="tobnpr" data-source="post: 2564324" data-attributes="member: 68758"><p>This.</p><p>It's been a long week...but running out of adjustment makes no sense to me on this. Disclaimer- never used a unithroater (usual reamer micrometer stop collar in a lathe) but it isn't adding up to me.</p><p></p><p>It's only about .570 from the shoulder datum to the forward end of the leade on the 26 Nosler. The stop collar may not be sitting right on the datum line in your chamber but it's going to be close enough... how you could run out of reamer? You need well under 1" of reamer (not incl the pilot) to hit whatever freebore you're looking for. What am I missing here?<img class="smilie smilie--emoji" loading="lazy" alt="🤔" title="Thinking face :thinking:" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f914.png" data-shortname=":thinking:" /></p><p></p><p>Remember you can also confirm your numbers by case protrusion with your dummy round (assuming you don't have a coned breech) with a depth mike since the barrel has been pulled.</p></blockquote><p></p>
[QUOTE="tobnpr, post: 2564324, member: 68758"] This. It's been a long week...but running out of adjustment makes no sense to me on this. Disclaimer- never used a unithroater (usual reamer micrometer stop collar in a lathe) but it isn't adding up to me. It's only about .570 from the shoulder datum to the forward end of the leade on the 26 Nosler. The stop collar may not be sitting right on the datum line in your chamber but it's going to be close enough... how you could run out of reamer? You need well under 1" of reamer (not incl the pilot) to hit whatever freebore you're looking for. What am I missing here?🤔 Remember you can also confirm your numbers by case protrusion with your dummy round (assuming you don't have a coned breech) with a depth mike since the barrel has been pulled. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
A moron and his uni-throater...
Top