7mm STW

[drtony]

I have been looking at this caliber for a while now. I would like all stainless steel receiver/bolt and barrel. Twist rate in the barrel would be 1:9" or 1:8" to stabilize the 175 gr. bullets

I would be fine with a 7 RUM action/bottom metal as well and then I could have the rifle re-chambered.

 

[Rum Man]

I have a factory take off barrel with brake and dies / brass and some bullets . It's a rifle I bought just for the action / stock . I could make you a package deal .
If your interested let me know .

Rum Man

 

[drtony]

So I would need the action, trigger, bottom metal and stock?

What kind of barrel? Twist?

 

[Rum Man]

Stock barrel take off Remington sps .
If your thinking reasonable stock I have a factory black take off I will give to you .
I'm not sure on the twist ? I'm not a 7 guy. I will check it out . I bought the package to build another 338 Edge .

Rum Man

 

[drtony]

I would not need the stock-- I ll order a MCM if I end up not buying an already assembled rifle.

 

[Rum Man]

Ok here are the components.
I would need to count the brass for a total . Two new bags of bertrum .the rest is R& P brass .

 

[Rum Man]

The Barrel I have listed in barrels actions parts . I can send you direct pictures if you like .

 

[Rum Man]

I have bottom metal also . Bdl to match barrel .

 

[Ram161]

Sako m995
Nightfoce nxs 5.5-22x50
Npr2 retical

78 grains h1000 Berger 168
150 new Remington brass
40 new bertam brass
Rcbs dies
2400 shipped
Weight 10.5 lbs with scope.

 

[drtony]

Does the Sako have stainless action and bolt? Would you split the scope and rifle?

 

[Ram161]

Blued action and I think bolt is polished.
I could split up

 

[drtony]

I really prefer stainless. Also, if I remember correctly, Sako has slower twist rates in their barrels.

I may have to edit what I am looking for specifics. My apologies.