7mm Rem Mag

DCGS

Official LRH SPONSOR
Joined
Dec 5, 2007
Messages
505
Location
Central North Carolina
Just finished this one today. Specs are:

Stiller Tac 300 Action
Krieger 1 in 9 twist finished at 24 inches 10, 3/16 flutes
Rem. Trigger and BDL bottom metal
Stiller Pic. Rail
Greybull Stock Black with Grey webbing

Took a couple of test shots with a load I used on another 7mm under a 1/2 moa. I used Norma Brass, 162 Amax, Rl 22 and 215 primers. Patrick, this is a very good feeling and balanced gun. It shows a lot of promise with a little work on load development. I wasn't sure what contour the barrel was. Maybe you can add that info.
 

Attachments

  • P.L. 7mm 003.jpg
    P.L. 7mm 003.jpg
    164.1 KB · Views: 81
  • P.L. 7mm 002.jpg
    P.L. 7mm 002.jpg
    132.5 KB · Views: 77
  • P.L. 7mm 001.jpg
    P.L. 7mm 001.jpg
    168.3 KB · Views: 79
Last edited:
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top