6mm-284 built on Sako 75 Action with lots of Carbon

[LJW]

On the fence about selling this one but if it happens I have my eye on something else. Less than 120 rounds down the tube. Not sure on the builder but they did the right job on it. Weighs around 6.5 pounds
Specs:
-Sako 75 Action, spiral fluted bolt
-Mullerworks Carbon Fiber 24 inch 1:7 twist, threaded 5/8x24
-McMillan Carbon Fiber Sako Hunter Stock with left side flush cups
-Sako trigger that break under 2lbs.
-2 mags, one has been modified for the 284 case other is stock
-Brand new firing pin assembly on the way due to no spring follower and had to buy the whole system from Midwest Gunworks.

I have dies and loads for Berger 105 Hybrids and 95 grain TMK's.
$2,750 or trade for 26 Nosler.

 

[LJW]

Up

 

[lou400a]

Lazer

 

[LJW]

Yes it is.

 

[LJW]

Up for another look

 

[cb4128]

WOW, what a badass rifle

 

[LJW]

Up for the weekend crowd

 

[PP guns]

I built that rifle... hahaha..sweet rig.

 

[Fubarredz]

Round count, and load what powder do you use.

 

[LJW]

120 rounds down the tube. Running reloader 17 with the 95's and reloader 26 with the 105's.

 

[Fubarredz]

Very nice rifle wish i could spring for it.

 

[Jud96]

120 rounds down the tube. Running reloader 17 with the 95's and reloader 26 with the 105's.

What speeds are you getting with the 105s and RL26? I'm building one of these in the near future. Thanks.

 

[LJW]

What speeds are you getting with the 105s and RL26? I'm building one of these in the near future. Thanks.

Lab Radar said average 5 shots was 3480. 56 grains of Reloader 26
There was a post on here awhile back and that gentleman was getting the same kind of speed with that load.