6 Creedmoor with 108gr Elite Hunter?

[Corvalliscory]

I'm looking to find a non temperature sensitive load for my 22in barrel 6mm Creedmoor for hunting using 108gr Elite Hunters,ADG brass and large rifle primers. I have plenty of mag length to go long. Was thinking about going with RL16 but I have lots of Staball 6.5 and N550. Anybody running anything similar or have ideas of things I should try? H4350 seemed a hair too fast when I messed with loading a little bit. RL16 worked pretty good with the old 108 eld m load I had but it was only about 2900-2950. Would like to be a hair faster.
Thanks

 

[Farmerboy78]

Try a mag primer and use the 4350 again

 

[Tiny Tim]

Haven't heard a lot of love for the Staball, but its worth a try. Make sure you use a mag primer. Also, H4831SC may be a good option. All that said, I've had great luck with H4350 and RL16.

 

[BallisticsGuy]

H4350 or RL-23. I get identical velocity from the two in a couple 6mm's but the RL-23 has been less temp sensitive. I shoot mostly in the desert so it matters. About 40 grains with either should put you where you're looking to be velocity wise.

 

[Corvalliscory]

Thanks for the advice, much appreciated!

 

[Rhovee]

RL 16 all the way. Very temp stable. I use 40 grains with 115's.

 

[Creedmoor shooter]

I'm using rl-16 with a 110 smk. 3008 fps with a fairly mild load.

 

[lancetkenyon]

I am running the 105 Hyb over 42.0gr H4350, Fed GM205M (SRP) w. Lapua SRP brass in my 24" 1:7.5" 6CM, and getting 3101fps. I can get 3200 at the top end, but don't want to push it that hard.
I had the 115 HVLD up to 3084fps at the top end too.

 

[Bang4theBuck]

I'm running Alpha SRP brass with Fed gmm primers. H4350, AND 108 eLDMs. No problem getting 3150, excellent accuracy.

 

[Longtine88]

6MM Creedmoor Alamo Precision Rifle
24" Bartlein 7.5" twist
Defiance Anti X
108 Elite's 0.042" off Lands
6.5 Staball 44.3 grains 3,152 Avg (3152, 3152, 3159, 3152, 3154 5 shot ladder)
210M Primers
ADG Brass New

I just ran the ladder, found the node and already pretty much knew the seating depth it liked all this morning.

Bam ......0.3 moa 5 shot cold bore shots @ 200 Yards.

I like the powder at a first glance. I'm going to shoot it this fall and winter and see how it holds up but looks promising.

 

[Dmagna]

I use h4350 shooting pretty much everything in the 6mm creed. One of the best temp stable powders out there.