New build off a Defiance Tenacity, Proof Competition SS 6mm 1-7.5 twist at 26" spiral cut square fluting by LRI, and muzzle end threaded 5/8-24" with their custom cut thread protector. Reamer was for use of 115 DTACs, re: SAAMI spec. Manners PRS 2 stock from Altus Shooting and a 14" ARCA 419 rail (used - very small nic on bottom of rail) LOP spacers. Receiver feed ramp opened to be able handle AICS mags without buffer/spacer if you wish. Trigger Tech Diamond Single stage at 1 1/2lbs, Nitrided Bolt, Media blasted barrel and receiver to match...this is the 3rd/4th one of these I've built and they all look sharp and shoot lights out...and your not going to find one at this kinda pricing so dont ask for less...4500$ plus shipping to your FFL, and no I'm not taking the trigger of or the rail...think its 11lbs 11.4 oz on the scale...
My pricing is gonna go up on my next few to 5K, using gain twist, left hand twist custom ordered Bartleins in both 25 and 6mm...gonna be sweet! Clayton builds "the best"
My pricing is gonna go up on my next few to 5K, using gain twist, left hand twist custom ordered Bartleins in both 25 and 6mm...gonna be sweet! Clayton builds "the best"