• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

6.5saum finally

This is the groups.
 

Attachments

  • 15919243046091012841100696763914.jpg
    15919243046091012841100696763914.jpg
    1 MB · Views: 227
I have found all my proofs don't copper up near as much as my regular steel barrels as well!

I'm interested to see how the partitions shoot for you, mine really likes barnes.
 
Are my speeds really slow so far?
I feel it's 100 fps slow for the powder charge I'm using. What speeds are you all getting with same charges?
Shep
 
Yes yours seems about 100 FPS slower then most saums w/H1000 & 140's that I've been around/loaded for.

I'd give it 100 rounds or so. I'd bet the barrel will speed up.
 
My Bartlein sped up a lot at 225rds or so.

I bought a ton of 130VLD a while back that I'm still churning through. My best load was 62.7gr H1000 with RP brass @3110fps. Recently my 8yr old was shooting some 100yd groups that were just wild as he usually shoots pretty well. I was like 'let me get on that thing'. Sure enough 1.25moa or so. Checked the chrono....3190 same lot of ammo. So I'm finishing them off and starting over. Might switch to something else but the 130VLD has done well.

But I love my SAUM. I'm on my third barrel since 08/09. There really is no such thing but to me it's as close as you're going to get to a do all cartridge. I'm glad it's gained the popularity it has and ADG is making brass for it. I've got 100 in waiting to try but the RP brass holds up pretty well for me. My first barrel/chamber was before GAP refined the reamer design and primer pockets would go quick.
 
With the 143 eldx and 61.5 gr of H1000 on a 27" tube I was getting 3060 fps.
I am getting 3075 with 57 rl26 and 147 eldm.
 
My last two Proofs didnt really grab copper till after 200 rounds, that's where they actually broke in and sped up on my labradar. They're both on the slow end of vo as well.
 
Just hope I don't have one of the bad barrels they been putting out. First sign is they are slow. Then they Spike pressure. Very dissatisfied with the velocity so far.
Shep
 
I've only ran the Berger 130 HVLD in my GAP so far. 63.0 of H 1000 gets me 3250 with no pressure signs. Hornady brass, F215, 24", 8 twist Bartlein Barrel. (.81 free bore) I'm going to try the 140 HVLD. I got some Retumbo to fool around with also. Hope you didn't get a bad barrel Shep
 
Last edited:
That's smoking with the 130s. I don't have any 130s to try in it yet. I'll try a few of my buddies 130 gamechangers in it. I play around with making pens too. The lever action really does work to open and close it.
Shep
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top