Bigeclipse
Well-Known Member
- Joined
- Aug 10, 2012
- Messages
- 1,969
Not much in the way of data out there. Im looking to load up some 130gr sledgehammers and 140 grain accubonds
6.5prcload data?
- Thread starter Bigeclipse
- Start date
Help Support Long Range Hunting Forum
130 accubond
RL-25 59.5
RL-26 58.0
2.930 OAL
both are max in my gun. sorry no info on sledgehammers
RL-26 had a low case fill a lot of room left RL-25 is a full case but not compressed
140 accubond
RL-25 57.5 is max but also the most accurate
3118 fps 28 inch barrel
2.930 OAL
all loads .020 off lands.
didn't try RL-26 with the 140 case fill to low for my liking and supply is getting low
RL-25 59.5
RL-26 58.0
2.930 OAL
both are max in my gun. sorry no info on sledgehammers
RL-26 had a low case fill a lot of room left RL-25 is a full case but not compressed
140 accubond
RL-25 57.5 is max but also the most accurate
3118 fps 28 inch barrel
2.930 OAL
all loads .020 off lands.
didn't try RL-26 with the 140 case fill to low for my liking and supply is getting low
Another Casual
Well-Known Member
Hodgdon has load data on their website for powder for 130's. For the 140 BT they are showing 2.880 for seating. Do your own research/don't trust me but I've been told the BT and accubond have the same profile. The 2.880 seating has worked well for me thus far with H1000. Other than that, Hornday has data for 140-147 grain. And as above, you can email Sierra and ask for the data for the PRC.
