6.5 PRC Brass

Kck

Active Member
Joined
Jun 29, 2017
Messages
33
I'm sure this may be an exercise in futility but does anyone know where some Lapua 6.5 PRC may be hiding? I anneal so I could get away with less than a box but would definitely take a box
 
Yeah I was going to post there but was wondering if there were any retailers that may be getting shipments. I'll post over there as well in case anyone has some.
 
I've walked past 2 100 round boxes in the last 2 wks here locally in Utah, I started out with hornady so that's what I've stuck with. Pm me so I have you saved and I'll keep my eyes peeled for some more to come in and I'll try to help you out
 
I've walked past 2 100 round boxes in the last 2 wks here locally in Utah, I started out with hornady so that's what I've stuck with. Pm me so I have you saved and I'll keep my eyes peeled for some more to come in and I'll try to help you out
Like you, I've had to stick with Hornady brass. The ADG won't work because of severe bolt lift at even light charges. And, of course, Lapua is virtually impossible to find. HOWEVER, the Hornady brass has turned out to be quite acceptable. I shoot quarter to half MOA out to 500 yards and one MOA at a thousand with my 6.5 PRC Ruger Hawkeye using H1000 and Berger 140 VLD's. I finally received 200 Berger 153.5 grain Hybrids. We'll see what they do with my rifle. It's had 1800 rounds through it and the throat looks like 60 grit sandpaper. But it still shoots! Putting off rebarreling. Not ready to remortgage the house.
 
I'm sure this may be an exercise in futility but does anyone know where some Lapua 6.5 PRC may be hiding? I anneal so I could get away with less than a box but would definitely take a box
Im on a road trip and if I recall right I seen some at the sportsman's warehouse in Pueblo Colorado but idk if that helps u at all
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top