I traded for this rifle. Ended up being slightly heavier then I'm wanting. I will pass on the savings to the next person. This setup new from Ryan will cost you over $5300. SOLDTrade value higher. You will get everything listed below. Rifle, brass, die set and hard case for shipping. Along with load data for a few different bullets. All shooting well under 0.5" at 100 yards. Round count estimated to be 94. All load data with targets will go to buyer. Some use marks. Hard to find the marks. Weight is 10.5lbs. Here are the build parts.
1. Manners EH1A with Badger mini Chassis, wsm 3 round magazine
2. Surgeon 591 Action
3. Brux Barrel, 1-8 twist, 26" plus break, Varmint Contour, interrupted flutes, threaded 5/8-24
4. Bixn Andy Pro Trigger Set at 1.5 lbs
5. Three port side discharge Muzzlebreak timed
6. Redding Comp Type S Die Set with COAL gauge, 94 pieces of fired brass, some still loaded,
Atlas not include or bipod rail.
On other forums. Time stamp rules apply. 1st to post on the open forum ( I will take this) followed by a PM with arranging payment and shipping info will get this setup.
1. Manners EH1A with Badger mini Chassis, wsm 3 round magazine
2. Surgeon 591 Action
3. Brux Barrel, 1-8 twist, 26" plus break, Varmint Contour, interrupted flutes, threaded 5/8-24
4. Bixn Andy Pro Trigger Set at 1.5 lbs
5. Three port side discharge Muzzlebreak timed
6. Redding Comp Type S Die Set with COAL gauge, 94 pieces of fired brass, some still loaded,
Atlas not include or bipod rail.
On other forums. Time stamp rules apply. 1st to post on the open forum ( I will take this) followed by a PM with arranging payment and shipping info will get this setup.
Last edited:
