• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED 6.5-06 Savage Build

Josh06

Well-Known Member
Joined
Sep 17, 2019
Messages
333
Location
Fort Worth, TX
22" 8 twist crown ridge barrel, crown ridge barrel nut, eabco lug, stocky's VG2, meraki machine brake. Bottom bolt release. FDE air cure cerakote on metal and I also sponged it on the stock as well. Will include either the weaver rail (I cut the rail shorter and beveled to fit the scope we were using) or the dnz mount 30mm medium, rcbs fl die set and 49 pieces of sig 270 headstamp brass. I don't know the exact round count on the barrel or the brass but the brass is the only that has been used in the barrel, best guesstimate is around 200-250 rounds. Shows signs of use and there are marks on the receiver from the rail. $1200 OBO shipped
 

Attachments

  • IMG_2849.jpg
    IMG_2849.jpg
    537.6 KB · Views: 93
  • IMG_2850.jpg
    IMG_2850.jpg
    331.5 KB · Views: 94
  • IMG_2851.jpg
    IMG_2851.jpg
    491.8 KB · Views: 82
  • IMG_2852.jpg
    IMG_2852.jpg
    179.5 KB · Views: 81
  • IMG_2853.jpg
    IMG_2853.jpg
    191.7 KB · Views: 75
  • IMG_2854.jpg
    IMG_2854.jpg
    441.3 KB · Views: 77
  • IMG_2856.jpg
    IMG_2856.jpg
    578.2 KB · Views: 74
  • IMG_2857.jpg
    IMG_2857.jpg
    457 KB · Views: 91
I never worked much to develop a load because this was supposed to be my son's rifle and he is only 9 and wasn't going to be pushing it far yet. He likes shooting my 223 and 22cm better so that's why I'm selling. I have a 260 and a 6.5cm so don't need another 6.5. The load we were using was 140 Nosler Ballistic Tip going 2840 and it shot under 1" at 100 yards. I'm sure with any load work at all it could be tightened up significantly.
 
22" 8 twist crown ridge barrel, crown ridge barrel nut, eabco lug, stocky's VG2, meraki machine brake. Bottom bolt release. FDE air cure cerakote on metal and I also sponged it on the stock as well. Will include either the weaver rail (I cut the rail shorter and beveled to fit the scope we were using) or the dnz mount 30mm medium, rcbs fl die set and 49 pieces of sig 270 headstamp brass. I don't know the exact round count on the barrel or the brass but the brass is the only that has been used in the barrel, best guesstimate is around 200-250 rounds. Shows signs of use and there are marks on the receiver from the rail. $1200 OBO shipped
Any trades I have a like new weatherby super varmint master I bought new in 2000 these are very rare and expensive if you can find one it's in 243 caliber round count 70 shoot sub moa easy
 

Recent Posts

Top