I shot my single shot homemade 50 this week and I'm alittle disappointed. I've heard the api bullets are not to accurate. I picked the barrel up as a 30" chambered blank. I checked the freebore and it has alot (I think) a 750 a-max is in the case about 1/4" to touch the lands. Should I try the a=max's first or just get a reamer and set it back. I hate to throw money down range and not know the problem! Can any one help?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
50 Barrel & API Bullets
- Thread starter Frank7mm
- Start date
Help Support Long Range Hunting Forum
Fiftydriver
Official LRH Sponsor
I would try it with the A-Max bullets first and see what happens. You can always set the barrel back if you have to but you may not have to.
The API projectiles, pretty much suck for accuracy to be blunt. If you get 1 moa with them you are doing AMAZINGLY well with these bullets.
The 750 A-Max is generally extremely accurate in its preferred loads. If you have a 1-15 twist, look to load it to 2500-2600 fps with H-50BMG and generally accuracy will be up to what the rifle is capable of.
Again, I would see what the A-Max bullets do before investing in a reamer and setting the barrel back.
Kirby Allen(50)
The API projectiles, pretty much suck for accuracy to be blunt. If you get 1 moa with them you are doing AMAZINGLY well with these bullets.
The 750 A-Max is generally extremely accurate in its preferred loads. If you have a 1-15 twist, look to load it to 2500-2600 fps with H-50BMG and generally accuracy will be up to what the rifle is capable of.
Again, I would see what the A-Max bullets do before investing in a reamer and setting the barrel back.
Kirby Allen(50)
