• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

358sta brass

I don't know if anyone does, the magnum .358's are fun though.

Just didn't want you thinking nobody saw your post.
 
if you want proper headstamp Quality Cartridge is the only one I know of or if you don't mind fireforming Grafs & Sons has 8mm rem mag brass you could use
 
you could use 375 H&H but your neck will end up short with the amount of body taper that would have to be removed. almost .060
 
I use 8mm RM and 375 H&H in mine. This is Hornady basic brass. It has a blank case head.
15521024702993293395065188305036.jpg
15521025181361162097404210474826.jpg
15521025518886201811036405546326.jpg
 
You might check Starline for STA brass or cylinders. If they do not have the marked brass, another option is to ream out an old piece of barrel, so the belt on the cylinder brass, stops the case when inserted, lock the "chamber" in your vice, then stamp your case heads yourself with a number and letters set. You can use a compas in the flash hole to make a line to align your stamps.
Some countries require the brass you bring in match the markings on the gun you bring in. RSA is one of those countries, just for example.
Ed
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top