akmtnhnt
Well-Known Member
338 Sherman Max - Tikka in an XLR MG 4.0
Tikka magnum bolt face action, factory handle.
20 in Stainless barrel by Preferred Barrels, threaded 5/8x24, .750 taperless fluted barrel contour. 1:8 twist rate, Chambered to seat the 250gr Badland sSBD-2 at 3.375 COAL.
Chassis is the XLR MG 4.0 with the carbon folding stock.
Bare weight with the 5rd MDT magazine is 7.125lbs
100 pieces of new unfired brass, plus a good handful of fired brass I used for load development plus my hunt this year. Happy to share my load data.
Comes with the Sherman Hornady reloading dies, a 284 to 308 expander mandrel plus a separate 338 expander mandrel and 2 SAC neck bushings. I ended up on .004 of neck tension. Also comes with a piece of brass I drilled and tapped to fit the Hornady OAL guage.
47 rounds down the barrel.
Scope in pic not included.
$2700
Tikka magnum bolt face action, factory handle.
20 in Stainless barrel by Preferred Barrels, threaded 5/8x24, .750 taperless fluted barrel contour. 1:8 twist rate, Chambered to seat the 250gr Badland sSBD-2 at 3.375 COAL.
Chassis is the XLR MG 4.0 with the carbon folding stock.
Bare weight with the 5rd MDT magazine is 7.125lbs
100 pieces of new unfired brass, plus a good handful of fired brass I used for load development plus my hunt this year. Happy to share my load data.
Comes with the Sherman Hornady reloading dies, a 284 to 308 expander mandrel plus a separate 338 expander mandrel and 2 SAC neck bushings. I ended up on .004 of neck tension. Also comes with a piece of brass I drilled and tapped to fit the Hornady OAL guage.
47 rounds down the barrel.
Scope in pic not included.
$2700
