338 Lapua Project

Tightline2001

Active Member
Joined
Dec 21, 2009
Messages
43
Just got my rifle finished up from the gun smith and was wondering if anyone had some load info they could help guide me with.

Rifle Specs:
28'' Kreiger Barrel 1-9 twist
Surgeon Action
A-5 Stock
Jewel Trigger

I have a box of the 300 SMKs and H1000, Retumbo, 4831 and 4831SC to use for my loads.

I would love to be able to get 2800fps second out of this round if can. If anyone has any suggestions I would greatly appreciate it.

Thanks

Clay
 
Start with 89 gr of H-1000, a CCI 250 and seat the 300 smk .060" off the lands. Mine is happy at 92.5 gr with a MV of 2805. But you need to work up as your Lilja will be a bit tight till you get 100 or so through it. Then try to increase your charge again. You may or may not get that velocity with a 1 in 9, mine is a 10.

Jeff
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top