To clear up some confusion...
this is a total package sale for $5,068 not including shipping
If you have never built a LR rig - load development and matching lots of powder is a huge bonus.
The cost of the rifle is $4,546 price breakdown is as follows...
$2,170 Defensive Edge Invoice (includes the below dies, ADG brass and bushing)
$1,050 Donor Remington 700 action + blue printed / bolt fluted
$250 Jewell HVRTSBR-A – 1 lbs. also includes B, C springs
$960 McMillan Adj. A3 w/Edge technology in GAP CAMO
$116 Night Force 40 MOA PIC RAIL (steel)
The additional $522 covers the powder and bullets. The following items are included...
- Redding FL "S" bushing die w/seating micrometer (two die set)
- .365 bushing for ADG brass (1 thou neck tension)
- 99 pieces ADG 338 Edge head stamped brass
(47 pieces 2x fired prepped, cleaned, and resized + 50 pieces of virgin brass)
- 1 dummy round (set at current CBTO)
- 1 fired modified case (FL sized bumped 2 thou and threaded for an OAL gauge)
(2) 8 lb kegs of H1000 matching lot #'s (1 keg opened for load development)
100 ea. Berger 300 grain Elite Hunters
Load Data: @ 7,700 ft., temp 32-60 degrees
CBTO 3.020 / COAL 3.927
BRASS: ADG
BULLET: Berger 300 gr. Elite Hunter (virtually the OTM)
POWDER: H 1000 (90.5 grains)
PRIMER: CCI 250
Ave Velocity: 2854 fps SD 4 / ES 9
Group size: .3 or < (3 shots) @ 100 yards
Trajectory validated out to 1,275 yards
cleaning and copper fouling has been addressed.
Weighs: 14 lbs. scoped w/ 1+2 in magazine.
Round count: 94
NOTE: originally throated for SMK's but I had Mile High Shooting in Erie, Colorado throat it for Berger Elite Hunters
this is a total package sale for $5,068 not including shipping
If you have never built a LR rig - load development and matching lots of powder is a huge bonus.
The cost of the rifle is $4,546 price breakdown is as follows...
$2,170 Defensive Edge Invoice (includes the below dies, ADG brass and bushing)
$1,050 Donor Remington 700 action + blue printed / bolt fluted
$250 Jewell HVRTSBR-A – 1 lbs. also includes B, C springs
$960 McMillan Adj. A3 w/Edge technology in GAP CAMO
$116 Night Force 40 MOA PIC RAIL (steel)
The additional $522 covers the powder and bullets. The following items are included...
- Redding FL "S" bushing die w/seating micrometer (two die set)
- .365 bushing for ADG brass (1 thou neck tension)
- 99 pieces ADG 338 Edge head stamped brass
(47 pieces 2x fired prepped, cleaned, and resized + 50 pieces of virgin brass)
- 1 dummy round (set at current CBTO)
- 1 fired modified case (FL sized bumped 2 thou and threaded for an OAL gauge)
(2) 8 lb kegs of H1000 matching lot #'s (1 keg opened for load development)
100 ea. Berger 300 grain Elite Hunters
Load Data: @ 7,700 ft., temp 32-60 degrees
CBTO 3.020 / COAL 3.927
BRASS: ADG
BULLET: Berger 300 gr. Elite Hunter (virtually the OTM)
POWDER: H 1000 (90.5 grains)
PRIMER: CCI 250
Ave Velocity: 2854 fps SD 4 / ES 9
Group size: .3 or < (3 shots) @ 100 yards
Trajectory validated out to 1,275 yards
cleaning and copper fouling has been addressed.
Weighs: 14 lbs. scoped w/ 1+2 in magazine.
Round count: 94
NOTE: originally throated for SMK's but I had Mile High Shooting in Erie, Colorado throat it for Berger Elite Hunters
