CBI 308 1:10 twist 26" long .835" at the muzzle behind the 5/8x24 threads.
I used this as a hunting barrel and killed several animals including a large mule deer buck at 509 yards. Shot 178gr eldx with cfe223 powder at 2775fps 1/2 moa. Very typical accuracy and ability to tune as all the other CBI barrels I have had. Counterbore opened up to .775" for use with an M16 extractor equipped action I had.
Round count unsure likely 700+ but it's a 308.....
$225 shipped
Savage model 12 stainless (small shank) fluted barrel rechambered to 223 Ackley improved, cut down to 25" and muzzle threaded 1/2x28. I believe this is a 1:9 twist shoots 55gr bullets very good and 69gr decently.
$175 shipped.
I bought this as a Remington 700 Shilen 22-243.
I can't confirm that it is a Shilen barrel and it's definitely not a 22-243 most likely a 22-250 as a full length sized piece of brass drops in perfectly. Also wouldn't screw on my actions the threads are slightly over sized but a remage nut screws on and off (it's a shouldered barrel used the nut to check the threads)
It's 21 1/4" long stainless, .650" at the muzzle, tight patch shows a 1:12 twist.
$100 shipped
I used this as a hunting barrel and killed several animals including a large mule deer buck at 509 yards. Shot 178gr eldx with cfe223 powder at 2775fps 1/2 moa. Very typical accuracy and ability to tune as all the other CBI barrels I have had. Counterbore opened up to .775" for use with an M16 extractor equipped action I had.
Round count unsure likely 700+ but it's a 308.....
$225 shipped
Savage model 12 stainless (small shank) fluted barrel rechambered to 223 Ackley improved, cut down to 25" and muzzle threaded 1/2x28. I believe this is a 1:9 twist shoots 55gr bullets very good and 69gr decently.
$175 shipped.
I bought this as a Remington 700 Shilen 22-243.
I can't confirm that it is a Shilen barrel and it's definitely not a 22-243 most likely a 22-250 as a full length sized piece of brass drops in perfectly. Also wouldn't screw on my actions the threads are slightly over sized but a remage nut screws on and off (it's a shouldered barrel used the nut to check the threads)
It's 21 1/4" long stainless, .650" at the muzzle, tight patch shows a 1:12 twist.
$100 shipped
