30-06 165&180 ttsx insight needed

MT257

Well-Known Member
Joined
Aug 26, 2015
Messages
520
Location
MT
Looking to see what everyone has had luck with when loading 165 and 180 ttsx bullets in the 30-06. Will be using fed 210 and winchester brass.TIA
 
Don't have any direct experience with the 165 or 180 but my 06 likes 55gr of H4350 with the 168 TTSXs. Don't remember the exact velocity but it was just above 2800fps. Groups were right at .5 MOA

-Matt
 
30-06 165 or 168 ttsx Which ever shoots better in your gun. This combo has been very accurate in three rifles I have tried it in.
58.5 h4350
Lapua brass
Fed 210m
Shot 2 moose and one elk with this load, no tracking required.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top