3 x 12 Schmidt & Bender

SEAHAWK

Member
Joined
Nov 2, 2004
Messages
11
Location
Wilmington,NC
Need some help on relicle movement. The vertical movement has T & H which is up which is down,what are the measurement units, also it has L & R for left and right movement?I assume it is in german,I don't have a manual on this scope.
 
From Schmidt Bender web site.

Hunting scopes
Remove the turret caps. The elevation dial will be marked with either a "U" or "H" for up and a "D" or "T" for down. The windage dial is marked with an "L" for left and an "R" for right. Turn the dial in the direction you want to move your shot. For example, to move your shot down and to the right, turn the elevation dial clockwise in the direction of "D" or "T." Then move the windage dial clockwise toward the "R."
 
I always remember that the 'H' is 'up' from the WW2 phrase 'Hande hoch' ...'hands up' /ubbthreads/images/graemlins/smile.gif (so 'T' is obviously the opposite).

The click value is 99.9% likely to be 1cm at 100m or 0.36in at 100yds
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top