S Stdrbs14 New Member Joined Nov 4, 2019 Messages 2 Location TEXAS Oct 17, 2021 #1 Anybody using H1000 with the Sierra 183s? I need some info on where to start my ladder test. Also what overall length should I start with? Thanks
Anybody using H1000 with the Sierra 183s? I need some info on where to start my ladder test. Also what overall length should I start with? Thanks
D Dmagna Well-Known Member LRH Supporter Joined May 30, 2018 Messages 2,126 Location New York Oct 17, 2021 #2 Start at about 59.5 grains then work up. I would either load to max mag length or .020 off, you can fine tune the seating dearth later.
Start at about 59.5 grains then work up. I would either load to max mag length or .020 off, you can fine tune the seating dearth later.
lancetkenyon Well-Known Member Joined Jun 3, 2013 Messages 7,362 Location Arizona Oct 17, 2021 #3 Not sure I would start quite as hot as Dmagna did, as I was close to pressure in mine w. 60.3gr under a 160 TMK. I would start at around 56.0gr myself, if you have no other experience with the powder and bullet in your rifle.
Not sure I would start quite as hot as Dmagna did, as I was close to pressure in mine w. 60.3gr under a 160 TMK. I would start at around 56.0gr myself, if you have no other experience with the powder and bullet in your rifle.
D Dmagna Well-Known Member LRH Supporter Joined May 30, 2018 Messages 2,126 Location New York Oct 18, 2021 #4 I have shot Berger 175s, 180s, 195s out of mine. Nosler puts their 185 RDF at max at 61.5 of H1000. I shoot 175s with N565 for my personal load.
I have shot Berger 175s, 180s, 195s out of mine. Nosler puts their 185 RDF at max at 61.5 of H1000. I shoot 175s with N565 for my personal load.