7handicapdoug
Member
I'm looking for New Unfired 264 Winchester Magnum Brass
I am interested in purchasing
( 200 to 300 ) Casings depending on Cost.
I am interested in purchasing
( 200 to 300 ) Casings depending on Cost.
264 Win Mag Brass
- Thread starter 7handicapdoug
- Start date
Help Support Long Range Hunting Forum
I will look at my shop tomorrow, and get back to you. 
7handicapdoug
Member
Thank You Very Much
I am not sure if you are looking for a particular headstamp, but here's another option for your consideration, https://www.grafs.com/retail/catalog/product/productId/73653
Morning, Feenix found you some and Midway has brass. If I sale any it would be Winchester brass and I will match there prices. And I only have 100 pieces I would part with. And necking down 7mm. works very well, easy peasy.
MagnumManiac
Well-Known Member
I have never been able to get 264WM stamped brass in Australia for the past 20 years…so I bought ADG 7RM brass and necked it down. I also use a shorter chamber and longer throat to match the 156g class of bullets.
The brass lasts a long time and the necking down is a good thing because it gives you a virgin starting point to trim to and get the neck thickness exactly where you need it.
Have had very good luck with accuracy using older stock Remington brass too. With the correct prep it performs very well.
Cheers.
The brass lasts a long time and the necking down is a good thing because it gives you a virgin starting point to trim to and get the neck thickness exactly where you need it.
Have had very good luck with accuracy using older stock Remington brass too. With the correct prep it performs very well.
Cheers.
7handicapdoug
Member
What do you want for the ( 100 )Morning, Feenix found you some and Midway has brass. If I sale any it would be Winchester brass and I will match there prices. And I only have 100 pieces I would part with. And necking down 7mm. works very well, easy peasy.
Win Mag Casings
7handicapdoug
Member
Also are they New Unfired Winchester brass
buckbrush
Well-Known Member
That's actually not the worst brass I've ever used.
I agree, they are just as good as Winchester. IMO
Tom264
Well-Known Member
Sent you a pm, don't know if you got it.
Mike Matteson
Well-Known Member
Graf & Son has 7mm Rem Mag brass. Those can be reduce to 6.5 or 264 neck sizes. That's petersons brass. You may need to get a bushing die and set up to do two steps to acheive the reduced neck sizes. You can do that with any 7mm Rem brass. 300WM the same can be done, It require more steps in neck reducetion.
