• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

For Sale 25 SST (TL3/Origin) part out

FrogFire7

Well-Known Member
Joined
May 23, 2017
Messages
1,577
Location
Bradford County, Pennsylvania
Got this preferred barrel blanks barrel this spring. Started load development on it and got busy with other things... Now getting the itch for something new (again). Barrel showed promise, but I did very little load development with it.

It's 18" long, #2 Sporter (I feel like it's slightly heavier than that), 5R 1-7 twist, shouldered for a bighorn TL3 OR origin with a HLR recoil lug. Chambered with the SST "B" reamer. Threaded 5/8x24. Shooting 134 eld-m bullets it should out perform a 24" 6.5 creed easily, in a shorter, cooler package.

It has 76 rounds through it. I have Sherman dies and brass- 50 count of the brass is new, the other 50 has been fire formed and 20 odd pieces have 2 firings on them. I also have (224) of the 134 eld-m bullets I could sell with it.

The one caveat is that the barrel engraving for some reason lines up on the right side of the action, upside down. They basically engraved it 180⁰ off. Slightly irritating, but doesn't affect anything whatsoever.

I also have about 7.5 lbs of RL26 I would sell with it if it's a local sale in North Central PA (powder available first to barrel buyer, then may be listed separately).


Asking $700 for the barrel, dies and brass. ($425 for the barrel, plus $275 for the dies and brass- dies and brass were just over $400 new; dies barely been used and have a .284 bushing with them, plus 50 of the brass is unused). Talk to me about a local sale and we can figure something out on the RL26.

Would like to get $1,150 for the action.

Grayboe stock and bottom metal could go for $700

Shipping costs would need to be discussed 😊

Thanks,

Jonathan
 

Attachments

  • PXL_20241116_025446337.jpg
    PXL_20241116_025446337.jpg
    316.5 KB · Views: 76
  • Screenshot_20241115-221005.png
    Screenshot_20241115-221005.png
    1.6 MB · Views: 77
  • Screenshot_20241115-221045.png
    Screenshot_20241115-221045.png
    766.1 KB · Views: 74
Last edited:
$750 for barrel, dies, brass

$1,900 for complete barreled action with dies and brass

$2,600 for complete rifle (no attachments) with dies and brass

I would eat shipping cost on the barrel package but would need to add some for the bigger packages since shipping prices have gone crazy

Stock and action not available separately at this time

Powder not available separately at this time, possibly after barrel sells
 
Last edited:
Top