208 amax vs nosler 190 lr's

[Rum and not the liquid]

I'm running out of 208s and saw that nosler has produced a long range 190 grain bullet has anyone tried it?

Cheers
Lucas

 

[Shane Lindsey]

I have tried them in my 30-06 and 300 WM. They were giving me fits in the 30-06 with seating depth. Tried with H4350 and RE17. Both would give good vertical with wide horizontal. Tweaked the seating depth and then it got loose. Just could not find the sweetspot.

They shoot about an inch in the 300 WM but only loading for mag length since it is a Ruger it is right at 3.335" for me. Not worth much more effort as others loads work better for these rifles. Too bad because I like the advertised lower functional velocity for the 30-06.

Good luck hopefully yours is easier than mine was.

 

[Rum and not the liquid]

That's a Bugger not sure if I want to buy a whole box on a maybe I think I'll do a bit more research

Thanks

Lucas

 

[Michael Eichele]

I'm running out of 208s and saw that nosler has produced a long range 190 grain bullet has anyone tried it?

Cheers
Lucas

Nosler makes a 210 ABLR also. My 300 win loves the 208 amax and the 210 ABLR equally. .25-.5 MOA consistently.

 

[Rum and not the liquid]

Oh they do to. My only other thought about dropping down a weight is to pick up some speed. My 208 are doing 2950 with 84.4 grains of re 22 were the nosler data reads 190s at bit over 3000 and the 210s down at 2800ish

Cheers
Lucas

 

[Michael Eichele]

Oh they do to. My only other thought about dropping down a weight is to pick up some speed. My 208 are doing 2950 with 84.4 grains of re 22 were the nosler data reads 190s at bit over 3000 and the 210s down at 2800ish

Cheers
Lucas

If you're getting 2950 with the 208, you'll be close to that with the 210 ablr